Features installation of vinyl siding

To make the facade of the house more attractive and protected from any external influences, you can sheathe it with the help of vinyl siding. Such material does not require any special skills for installation, so you can handle it yourself. Vinyl siding can be installed on houses from any material.

Training

And although manufacturers say that you can install vinyl siding even at sub-zero temperatures, it is recommended to wait for the warmer time of the year to avoid cracking the material. Siding should not be installed directly on the walls of the building, as this may impair air circulation and contribute to the appearance of fungi. In addition, this method of installation will deprive you of the possibility to insulate the building. To mount vinyl siding, you must use a metal or wood batten. This element will help to maximize align the walls.

Lathing wood

To make a wooden crate, use dry intact wood. Its moisture values ​​should not exceed 12%, otherwise the whole structure may be deformed. Before installing the lathing material must undergo a special treatment with antiseptics and other compounds that protect the wood from fires.

To determine the depth of the structure, it is necessary to take into account the characteristics of the insulation. The crate should be installed in increments of no more than 40 cm. If the house is located in a sufficiently windy place, the step should be 20 cm. To fix the wooden bars on the wall, nails or screws are used.

Metal crate

This method is recommended for brick, aerated concrete and foam concrete walls. In addition, this method provides for the presence of thermal insulation. Metal crate can be called the most durable and durable. To install it, markup is made on the wall, and plastic dowels are mounted. Then steam and heat insulation is laid, after which you can begin to install siding.

Siding installation

Vinyl siding tends to expand from temperature exposure, so you will need to leave a gap of about 2 mm between the nail head and the strip itself. Siding stacked overlap, so that no precipitations fall into the cracks. Overlaps should change their location every few rows. The bottom row of siding is installed using the level so that the whole structure is flat. At the top of the building you need to install a finishing rail. Siding on it does not need to fix, it serves only as an element of decor.