Daily maintenance method of sterling silver jewelry

Daily maintenance method of sterling silver jewelry

1. The best maintenance method for sterling silver jewelry is to wear it every day, because human body oils can produce a natural and moist luster.

2. When wearing silver jewelry, do not wear other metal jewelry at the same time to avoid collision deformation or scratches.

3. Keep sterling silver jewelry dry, do not swim with it, and do not approach hot springs and seawater.

4. When not in use, wipe the surface with cotton cloth or tissue paper to remove moisture and dirt, and then place it in a sealed bag or box to avoid contact with air.

5. If you find signs of sterling silver jewelry turning yellow, the easiest way is to use toothpaste and a little water to lightly wash the surface.

6. The silver cloth contains silver maintenance ingredients and cannot be washed. If the silver cloth can be used to restore about 80% of the silver-white condition, there is no need to use silver wiping milk and silver washing water. These products are all corrosive to a certain extent, and silver jewelry will become more prone to yellowing after using these products.

7. If the sterling silver jewelry is not processed and collected after wearing, it is very likely to make the silver jewelry black. At this time, you should use a small jewelry brush to clean the fine seams of the jewelry, and then put a drop of silver milk on the tissue to wipe off the black oxide on the surface of the silver jewelry, and then use the silver cloth to restore the original brightness of the jewelry.

How to identify sterling silver jewelry

1. Color discrimination method:

Observed with the eyes, it looks white, shiny and fine workmanship. And the mark printed on the jewelry is the silver jewelry with high fineness, the color is poor, and the dull silver jewelry is mostly fake silver jewelry.

2. Bending method:

Gently fold silver jewelry by hand. The fineness that is easy to bend and not easy to break, is rigid, and the fineness that is barely folded is low. The silver jewelry that will crack after being bent or knocked with a hammer for a few times cannot withstand light folding and is easy to break are fakes.

3. Throwing method:

Throw the silver jewelry on the platform from top to bottom, the bounce is not high, and the sound is stable for high-quality silver jewelry, and the high-quality silver jewelry is thrown on the platform, and the high-quality silver jewelry is fake or low-quality silver jewelry. .

4. Nitric acid identification method:

Using a glass rod to drop nitric acid at the mouth of the silver jewelry, the color is brown, the color of microgreen is higher, it is dark green, and the color of black is lower.

5. Identification method with magnets:

Real silver cannot be attracted by magnets. Many fake silver products on the market are made of nickel, which attracts magnets. This method is the easiest and most convenient.

Daily wearing precautions

According to the principles described above, the following points should be paid attention to when wearing silver jewelry:

1. Before wearing silver jewelry, please apply a layer of colorless nail polish to make the surface glossy and durable.

2. Silver jewelry should be avoided to be worn in hot springs or seawater areas. The contact of silver jewelry with warm water or sulfide will easily change the surface.

3. When taking a bath or swimming, be sure to take off the silver jewelry to avoid contact with chemicals such as bleach.

4. When putting on makeup, please try to avoid contact between cosmetics and perfumes and silver jewelry.

5. During the wearing process, please try to avoid any other chemical substances contacting the silver jewelry, so as to avoid chemical reaction.

6. After each wearing, use cotton cloth or tissue paper to wipe the surface lightly to remove water and dirt, and then store it in a sealed bag to avoid contact with air.

How to properly handle blackened silver jewelry

1. You can try to wipe the slight black oxide on the silver surface with a drawing eraser.

2. You can try to apply a little toothpaste on the surface of the silver jewelry, then scrub with a toothbrush dipped in warm water, and finally dry it with a full-wool woolen cloth.

3. When the surface of silver jewelry is slightly corroded and slightly discolored, it can be gently wiped with detergent or hot medium-sized soap, first brushed with a soft brush, and then dried with full-wool wool. Show the original light.

4. Rinse with washing powder and warm boiled water into a solution, then wet the surface with phosphoric acid solution, and then wipe with a flannel to make the silver jewelry cleaner.

5. The silver jewelry is light brown when oxidized. It can be wiped with a soft cloth dipped in a little silver oil, or soaked in silver washing water, or directly wiped with a silver cloth.

6. Soak the silver jewelry in the silver washing water for a while, and then rinse it with water after taking it out.

7. It is one of the fastest and most convenient ways to use the silver cloth. The silver cloth contains silver maintenance ingredients and cannot be washed with water. The stains produced by wiping are silver and can be used many times.

8. Silver ornaments with delicate and three-dimensional workmanship should avoid deliberately wiping the light.

9. If the silver jewelry is not sealed and kept or wiped frequently, it will easily darken the color.

10. The best way to maintain silver jewelry is to wear it every day, because body oil can make silver produce a natural and moist luster.

How to buy good quality and cheap sterling silver wholesale jewelry? You can come to asujewelry to see

Report this Page