Waste foam granulator

by allen guo Food Processing Machinery

Brief introduction: Waste foam granulator is a special machine for crushing and granulating waste foam plastic, pearl cotton, and foamed polyethylene. It adopts electric screen changing technology to

Recommended Features

1. The screw barrels of the main and auxiliary machines are made of imported high-strength and high-quality carbon structural steel, which is durable.
2. The Model 200 uses a conical screw barrel to speed up the feeding speed and greatly increase the output and quality.
3. The main and auxiliary machines are used for the production, the temperature stability of the electric heating, the effectiveness of the continuous improvement of the chemical structure of the mate
4. This unit is mainly composed of crushing dry cleaning machine, extruder and automatic traction pelletizer. Automatic feeding, automatic temperature control, automatic ash removal, impurity removal,

Learn more about Waste foam granulator»

Review on Waste foam granulator

Fourth, use tips
1. Check whether the screws are loose and whether each spindle is flexible.
2. Install each motor and its circuit correctly. The motor uses a three-phase 380V heating chip with a 220V current.
3. Make good ground protection for each machine.
4. Check whether the main shaft of the test machine is turned correctly.
5. The heating sheet is pre-heated until the barrel shell melts the foam plastic, and pay attention to the fact that the raw materials in the upper and lower barrels must be completely dissolved before the extruder starts, which is used to rotate the big wheel flexibly. Because the residual raw material of the head dissolves, it is recommended to use a torch to strengthen the preheating of the upper and lower heads.
6, flexibly grasp the length of the draw bar, depending on the temperature and water temperature, cool the draw bar by water about 1.1-1.7M, so that the draw bar is not brittle, and does not stick after cutting.
7. Observe the color and shape of the material, and flexibly grasp the supply and stop of the power supply of each heater.
8. For those with more impurities such as ash and soil, you can add 60-80 mesh and 1-3 layers of sieve before the sieve to ensure the color and purity of the particles.