What Are The Common Paint Problems & How To Fix Them?

When you notice the paint on your exterior and interior walls fading, chipping, or cracking after a few days of applying a new paint coat, it’s maybe due to insufficient surface preparation. In some cases, it’s been a long time since the walls have been painted and it just needs a fresh paint coat. But, when you have to deal with frequent paint problems, you need to figure out the source and fix it immediately. The main reason behind the failure of a paint job is improper surface preparation. Many amateur Melbourne painters lack the proper knowledge and expertise regarding surface preparation, which can result in the improper adhering of the paint. The process of preparation depends on what type of paint you are using and what you are painting. Take a look at some of the common paint problems and how you can fix them. 

Fading

Due to excessive sunlight, exterior surfaces can fade away as the UV rays break down the pigment of the paint. To fix it, make sure to get rid of any chalking before you repaint the surface. 

Cracking

When your paint has cracked, it means it may have dried quickly or it was too thin. To fix this issue, make sure to remove the paint first and sand down the surface. After that, you need to apply primer and then repaint. Painting over the cracks is going to produce the same harsh, uneven texture and surface. 

Peeling

These types of paint problems are handled by the roof painters in Melbourne and are generally found on the exterior, caused due to mould, rust, or dampness, which damages the paint finish. By repainting and sanding the surface, small affected areas can be fixed, as long as the paint matches. When a larger area has been affected, the whole exterior may require treatment. 

Stains

When you see your surface have stains, they may bleed through a new paint coat. If it’s difficult to remove the stains completely, make use of a high-quality primer to seal the surface. 

Gritty surface

If the surface was not cleaned properly before the application of a fresh paint coat, grime, dirt, and grease can put a negative impact on the final results. Or debris or dust particles have gotten into the paint, rollers, or brushes at the time of painting. You can prevent this by cleaning the surface thoroughly before painting. 

Hope, you came to know the common paint problems and how you can fix them. If you like this blog, don’t forget to share it with your friends, and give thumbs up! 

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Nov 12th 2021 00:27. Viewed 189 times.

Share on APSense

Comments