Replacing the sand washing machine usage and lubricants

Posted by Huo G.
2
Jun 24, 2016
170 Views

Sand washing machine series, there are two: one is the XSD sand washing machine series, this series is wheeled washing equipment, you can sand the powder and impurities washed, thereby improving the quality of sand; the other is a series LXS sand washing machine, sand washing machine of this series sink below three weir plates form sedimentation pond, but not into the screw head sedimentation tanks, using auger principle sand washing, dewatering operations, this series of models basis having 15 degrees tilt angle arrangement can also be used in metallurgical industry grading operations.


The normal use of sand washing machine sand washing machine can greatly extend the life of
1. sand washing machine should always check the oil level in the gear unit, the tightness of the belt, the degree of engagement and lubrication of gears, fasteners for loose connections, to ensure that the machine is in the normal steady-state operation. At the same time, to the various parts of the friction adequate lubrication, regular greasing;
2, after the first gear to add oil for one month, to timely change the oil, filling should be filtered.
3, sand washing machine use, there should be a dedicated technical staff responsible for the custody, the operator must have a certain technology. Sand washing machine is installed before the operator must carry out technical operations training to understand the principle of sand washing machine, performance, familiar with the operating procedures;
4, to be equipped with the necessary maintenance tools, as well as lubricants and fittings

Impact Crusher

CS Series Cone Crusher

RTM Vertical Superfine Grinder

High-Pressure Suspension Grinder

Comments
avatar
Please sign in to add comment.