Using its own permanent magnetic liner, one side is firmly stuck on
the tube and the end cap, the other side of the ball mill and small
pieces of iron tightly adsorbed on a magnetic medium, forming a
protective layer adsorption, when the protective layer reaches a certain
thickness later, between the liner and the movement of the grinding
media and material no longer have a direct impact and abrasion, which
reduces liner wear rate, so that the liner cycle greatly extended. The
protective layer is always worn with complementary dynamic equilibrium,
played a role in the protection of permanent magnetic liner. Magnetic
Lining general manganese steel liner life can reach several times.
Metal magnetic liner is composed of a metal body, the permanent magnet,
the elastic layer of three parts. Metal body is a major component of the
magnetic metal liner. Its role is to protect the magnets from external
shocks, and have sufficient mechanical strength and suitable
permeability. Magnetic flux density housing to meet the needs of the
adsorption surface protective layer. Small cylinder liner substantially
flat, planar cover liner large hemispherical convex shape.
Permanent magnet is a core part of the liner. In addition to the
adsorption magnetic lining layer protection, but also itself firmly
stuck on the tube or cover. Circuit design using the liner within the
cylinder, the end cap to the circumferential direction of the N-S poles
alternately arranged in the case of open magnetic system.
Special elastic adhesive layer is firmly bonded to the magnet block in
the metal housing, because the layer has good flexibility, can play a
cushioning material and grinding media impact of the magnet, while the
bolt hole by magnetic seal and rubber pads dual protection without
leakage pulp.
Mobile Crushing Plant
Spring Cone Crusher
Three-cylinder Dryer
Vibrating Feeder