How to Replace a Frameless Shower Door Sweepsby PFOkUS F. Buy Frameless Shower Door Sweep
It is extremely important to have a clean and hygienic bathroom. Cleanliness ensures high level of comfort and maintains the beauty of the shower. If water spills and leaks are flooding your shower floor then you must pay immediate attention to avoid the growth of mold and bacteria on the wet surface. In order to keep your shower floor dry you need a little thing which will literally sweep away the leakage menace.
pFOkUS delivers a rare range of frameless shower door sweeps molded from clear poly carbonate material. These sweeps provide a strong grip and can be simply pushed on the bottom of the shower door. The sweeps are stylish, seamless and unique and they efficiently serve their purpose without sacrificing functionality. After buying the product you can relax and enjoy your shower without the dilemma of sweeping out water spills and leaks.
Once you find signs of wearing out on the sweep, you can be rest assured that it will allow water to leak beneath the door and allows it pool on the shower floor. Although this will not be a problem suddenly, but in the long run the floor surface will suffer extremely from the water damage. All of this can be easily averted with the use of a high quality shower door sweep. Further, we will acquaint you with the simple procedure of replacing your worn out and damaged shower door sweep with a brand new one.
1. According to the model of your frameless shower door, you either can simply pull out the old sweep or open the shower door by the hinges and then proceed to remove the sweep. You just have to grip the sweep firmly and pull it outwards. This will make the sweep to slide out easily. Check if the sweep is screwed to the shower door and unscrew it to move forward.
2. Now, basing the old sweep as a guide, measure it and purchase a frameless shower door sweep from pFOkUS online store. You don’t need to look for the exact size while placing the order, but the new sweep can be a tad bit longer than the old one.
3. Once you get the brand new shower door sweep, unpack it and cut it to the exact length as the old sweep. You can use a strong scissors or sharp knife to cut the sweep. Use a sand paper to smoothen out the edges of the sweep.
4. After you get the exact size of the sweep, use petroleum jelly to line the inside of the sweep track. This will permit the sweep to slide onto the bottom of the door with ease and efficiency.
Created on Oct 6th 2017 01:05. Viewed 531 times.