If you
already have a frameless shower door
sweep but, are still dealing with water leaks then the only reason will be
the aging and damage of the already installed shower door sweep. Once shower
water starts to pool on the floor, then in the long run you will have to deal
with mold and mildew growth on the surface of the shower. Nevertheless, you can
help yourself from such a grave situation with the use of a high quality shower
door sweep. Read on, to know the simple procedure of replacing worn out and
damaged shower door sweep with a new sweep.
pFOkUS
brings forth a marvelous range of frameless
shower door sweeps molded from clear polycarbonate material. These sweeps
deliver a strong and power packed grip on the bottom of the shower doors,
without letting any water to escape out. pFOkUS sweeps can be comfortably
pushed onto the bottom of the shower door. The sweeps have a beautiful finish
with a seamless and unique look. It is a
sweep which refrains from sacrificing functionality, in spite of its engaging
finish. Once you install pFOkUS shower door sweeps, you can experience a leak
proof and spill proof shower.
Introducing
to you the largest seal ever.
DS9371-1 shower
door sweep has the largest seal on the market today. Closing the largest gaps
under your shower door, just became simple. Our DS9371-1 comes in many sizes –
32” and 36” lengths. Thickness of glass:. If you are
looking for a sweep with a large seal, apt for the thickness of glass size 5/16”(8mm) and 3/8” (10mm) then
you can opt for pFOkUS frameless shower
door sweep DS9371-1.
How to Replace a Frameless Shower
Door Sweep
- Frameless
shower doors consist of sweeps, so that they can prevent the shower water from
escaping through the bottom of the door. The sweep will either be fixed to the
shower door with the help of screws, adhesives, or will be a ‘push-on’ type.
- Observe
the sweep and check how it is fixed to the bottom of the shower door.
Accordingly, either you can simply pull out the old sweep or carefully open the
shower door thorough the hinges and then undo the sweep without damaging the
door.
-
If the
sweep is of the ‘push-on’ type then with little effort, you can simply pull out
the old sweep. Otherwise, if the sweep is attached with screw, then it is
important to carefully unscrew it. In the presence of adhesive, you have to
gradually scrap off the adhesive with a putty knife.
- Thereafter,
considering the old sweep as a comparative guide, calculate its dimensions and
place an order for a frameless shower door sweep on pFOkUS online store. Then place
an order for a frameless
shower door sweep. Once you receive the new sweep, make sure that it’s length is same as
the old one.
- In case
the new sweep is slightly longer than the old one, then cut it to the exact
size with a cutter knife and thereby, using sand paper smoothen out the edges
of the sweep. Now, use some soapy water or petroleum jelly to line the inside
of the sweep track. This way, the new sweep from pFOkUS will easily slide onto
the bottom of the door.
Reach us today @ www.pfokus.com to buy a brand new high
quality shower door sweep and bid adieu to water leaks.