How to Install LED Downlight

If you want to know how to install LED downlight, I will show you an example of the LED downlight 18W SMD 3014. Please follow the four steps.

Step 1, Carefully make an opening 165mm diameter.

Step 2, Fit the three spring buckles to the panel light as below shown.

Step 3, Lift the spring buckles with care through a 50deg turn and hold them there as you slowly move the panel into the opening made earlier.

Step 4, When the spring buckes are securely touching the opening edge line, gently release the spring buckles and the n with maximun care and a gentle force, push the panel into the hole, you will notice a sudden movement locked onto the back side of the ceiling. LED downlight installation is finished.

If you have any questions, please feel free contact us.

This article is from How to Install LED Downlight.