Easy Ways to troubleshoot Brother Printer Error 50

by John Short I’m an IT Expert living in Plano, TX. I am a fan o

Most of the individuals are using amazing multiple services of Brother Printer. It has some wonderful features such as clear scanning and faxing, high- quality printing in a single machine. So all individuals are satisfied with the Brother Printer service. But sometimes, individuals have complained about some common issue or error which they have encountered with the brother printer performance. If you are also facing this error 50 on your brother printer then you can get free of this error by following given steps.

Common Causes of Brother Printer Error 50:

You will get below the common reasons for this error.

When a ripped piece of paper or paper clip, is stuck in the device
When any type of Mechanical fault has occurred on your printer.

Solutions to fix Brother Printer Error 50:

If you are trying to resolve manually Brother Printer Error 50 then you can use the below-mentioned resolutions to get an instant and positive solution

Solution 1

First, you need to open the scanner cover with the help of plastic tabs, placed at the left and right side of the printer device.
Then, set your printer head in the middle of the printer.
Now, you have to ensure that any piece of staple, paper, or clip has not jammed.
Now restart your printer, if you get again this error then you need to go to the next resolution.

Solution 2

Firstly, open your scanner cover by the help of the plastic clips of the cover, located at the left and right side of the printer machine until it exits carefully into the open condition.
Then, shift the print head to the right side under the cover to ensure that you have cleaned the complete encoder strip.
Utilize by using a lint-free cloth, carefully hold the encoder strip off both sides and rub the cloth on the strip from one side to another side at least three times.
After cleaning it, restart your printer, if you face again then you can use the next method.

Solution 3

You need to ensure for the position of the encoder strip which gives the print head, its position is fine or not.
You need to open the device and reinsert the encoder strip in the right place.
After reinserting the strip, restart your printer and check that whether the error has resolved.

If the error persists again than you need to dial Brother Printer Support Number to get perfect guidance for your error or issue. If you want to join with the Brother printer certified team then you need to reach us at Brother Printer helpline number. So, no need to encounter with the brother printer error, if you have a friendly behavior technician’s team.

John Rise is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games,internet and new media. He writes for Printer support at Brother Printer Support & Brother printer Customer support.

SOURCE- https://printerassistanceservices.com/blog/easy-ways-to-troubleshoot-brother-printer-error-50/