4 Tips on Church Sound System Installation

An acoustic system is an integral part of a church and any other religious facility. You need a high quality sound system to ensure that the gospels of God are communicated effectively to the audience. However, installing and maintaining an audio system can be daunting, especially at places like the Church where a large gathering needs to be addressed. Therefore, when it is about installing a sound system in a church or a similar facility then you should take the help of a reputable company. Here are few tips that will ensure your sound system produces excellent sound quality:

Avoid phasing: When two different sound waves play from two different sources at exactly the same time then they come into phase. When this happens then the sound waves can double in amplitude. This can create a series of sound related issues. However, when two sound waves are played in sync to each other they get cancelled out and are not heard.

Make arrangements for parallel walls: A space that has parallel walls can create most of the problems related to phasing. The maximum chances of phasing are in these rooms. As such you have to ensure that you have made proper adjustments for these walls. In case of sound the angle of refraction is equal to the angle of incidence. This means that sound reflects at the same angle when it hits a surface. In a room where it is easy for sound to bounce back and forth, frequencies are trapped and your sound system will fail to perform properly.

Take care of the dispersion angle: Don’t forget to consider the dispersion angle. Each speaker has a different dispersion angle that is most often mentioned in the instruction booklet that comes with the device. There will always be a vertical and horizontal angle and you need to check whether or not the speaker is turned sideways. Use a protractor to line up the edges if you do not want the sound to be wasted over the walls.

Place the subwoofers on the floor: Place the subwoofers on the floor if you want to get the best low end of the sound system. Subwoofers are known to push the low end in audio systems. The speaker’s box is very important as it can be adjusted to maximize the speaker’s output. Subwoofers resonate the speaker box as well as the room where they are placed. When you mount a speaker on the wall the resonance is reduced greatly.