Articles
Two main methods for preheating in welded steel pipe production
by Lucy H. SEO managerIt is time for us to start the preheat since manufacturers have known the benefits of preheating for welded steel pipe like the ERW steel pipe. There are two main methods for customers to get today.
Common method is preheating with an open flame from a torch. This method is easy to get and apply, of course, it would supply simple setup and portability for manufacturers with the low initial investment cost. Editor knows that majority of us would know this way. Due to much of the heat would lost into surrounding air with the open flame method sot it seems like inefficient compared to other better options which we will talk later.
Induction heating would be a better one than open flame for preheating. It provides safe option for preheating so it has been applied in pipe welding. It also offers benefits for other part geometries, including flat plates for structural steel applications, as well as for shrink-fit applications.
SRT steel pipe manufacturers have taken the second one which would guarantee the high quality of the steel pipes as well as the safety of the workers and the products too.
Sponsor Ads
About Lucy H. 
SEO manager
176 connections, 5 recommendations, 769 honor points.Joined APSense since, July 12th, 2016, From changsha, China.
Created on Dec 11th 2017 21:10. Viewed 284 times.
