Questions To Ask An MBBR Media Supplier Before Buying Their Product
by Barkha Pahuja SEO/WriterMoving Bed Biofilm Reactor or MBBR is one of the most commonly
used water waste treatment systems that allow the biofilm to be grown
and then extract the organic compounds. MBBR media is the carrier
that provides the surface for biofilm’s growth. These carriers have
a density that is almost as same as that of water and are mixed
inside the aeration tank with the waste. Being mixed in the tank,
these media are in close contact with the biomass or the organic
compounds in the carrier and the substrate present in the wastewater.
The MBBR media plays a crucial role in the successful treatment of
wastewater by offering surface. You can consult the MBBR media
manufacturer in Delhi to find the best quality media for your MBBR
waste treatment systems. If you are also planning to buy these, here
are some questions you should as the MBBR media supplier in Delhi.
Let’s have a quick read.
What Raw Material Is Used In Its
Making
The raw material of the MBBR media plays a crucial in
ensuring that the surface is proper for the biofilm to grow.
Polypropylene, commonly also known as polypropene, makes for the
perfect raw material for the making of the MBBR media. The
thermoplastic polymer of polypropylene makes it a great raw material.
What Is Its Precise Shape?
The shape of an MBBR media is
also an important thing that you should check with the MBBR settler
media supplier or manufacturer. The ideal shape of this media is
supposed to be trapezoidal cylindrical. This allows for the perfect
surface for the biofilm to grow and treat the wastewater.
What
Is Its Density?
Density is the calculation of the mass per volume.
Specific density is the ratio of any specific substance or object to
that of a substance that is taken as a reference. Usually, this
specific density while MBBR media is calculated by dividing the
density of the media with that of the density of the water. It is
considered that good media should always have density almost as close
to water. The density, on the other hand, is calculated by dividing
the mass of the media with the volume. A good MBBR media, as
discussed should have density closest to that of water. The density
should be around 0.93 gm/cc.
What Is The Maximum Operating
Temperature?
The operating temperature in the most general terms
is the temperature at which any electrical or mechanical device
operates. The maximum operating temperature is the temperature until
which the media would work fine but if the temperature increases even
a degree further, it would cease to operate, For MBBR media, the
maximum continuous operating temperature till which they can
continuously operate is 80 degrees Celsius.
These are some of
the simplest and direct questions you can ask the person selling you
MBBR media. Getting the right answers to them would ensure that you
are investing your money in the right media material or not.
Sponsor Ads
Created on Jun 13th 2019 02:47. Viewed 245 times.