Picking the Perfect Roofing Nails for You

Many roofing attempts, such as fastening shingles, require the use of roofing nails, which are available in a variety of materials and dimensions and are more durable than standard or traditional nails. The type of shank helps distinguish between the different roofing nails and others. So which nails will serve best for your roofing project?

A Sharp Shank Nail

A sharp shank nail has a large head, which makes it remarkably strong and will shield the roofing system and the home you love so much from Mother Nature. They are particularly ideal for homes in areas with strong winds. Stainless Steel Clout Nails or Spiked shank roofing nails are made from a myriad of materials including galvanized carbon steel, zinc-plated steel, stainless steel, copper, or aluminum. The barbed shank nail is primarily used for bitumen roofing felts.

How about flat shank nails for your roofing system?

While not as tough as ring shank nails, smooth shank nails are a lot less pricey and easier to drive. They are produced from copper, aluminum, stainless steel, or galvanized carbon steel. Horizontal shank roofing nails are the standard, most affordable, and most commonly used roofing nails.

Spiral shank nails for your roofing system

Fastener shank nails feature a twisted shank, flathead, and diamond tip point, all of which make it ideal for securing your roofing system. They work particularly well for wood and pallets; wood or shingles are less prone to split when a roofing nail with a more pointed tip is used because there is less stress when it penetrates.

Picking the right material for your roofing nails

The material of your roofing system and the location of your home will help you determine the ideal material for your roofing nails. For instance, aluminum nails are well suited for metal roofs and shingles. However, they are not recommended for areas where they can be exposed to chemicals or salt, so use stainless steel roofing nails if you live in a marshy area. Stainless steel nails are suitable for fastening tiles and slate. Galvanized roofing nails, or steel nails covered in zinc, are perfect for bitumen shingles, and they hold up well against rust. Aluminum nails should be used for facades made out of metal and siding. If you have a regular roofing surface, then you may want to use roofing nails manufactured from copper.

Size Matters!

Size is another determining factor for choosing roofing nails. The length of the nail is the stem. They are available at lengths up to 6 inches (15 centimeters), but the usual lengths are between 1 and 2 inches (2 and 5 centimeters). The shank height you need depends on the material of your roofing system. Be sure to use 1-inch (2.5 centimeters) nails for asphalt or fiberglass shingles; you’ll need larger nails for wood shingles, which are thicker.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jul 27th 2021 06:54. Viewed 168 times.

Share on APSense

Comments