HOW TO SET UP THE BROTHER HL-L2360DW PRINTER?

by Oliver Smith Sr. SEO Executive

The Brother HL-L2360DW printer is a wireless printer that delivers optimum efficiency and high performance to its users. The printer allows users to print wirelessly through their Android phones and iPhones using the brother’s inbuilt iPrint & Scan application. One can find this application on the play store or app store. The application is simple and consists of various templates that users can utilize to create custom projects featuring photos or albums. This monochrome printer encompasses about 32MB of internal memory and a robust 266MHz processor, enabling users to transfer more documents through the printer speedily. The printer promises sharp and crisp prints in words or photos while simultaneously providing more sharp-edge printing. Most users can encounter problems while setting up the Brother HL-L2360DW laser printer. These problems are typically a result of improper setup and are resolvable by correctly setting up the printer.

STEPS FOR BROTHER HL-L2360DW PRINTER SETUP

The setup for this Brother printer is easy, especially given the correct instructions. You can find the proper instructions for the same below. Please note that this setup for Brother printer HL-L2360DW will require either a WLAN router or Air Station One-Touch Secure System. Please follow the steps mentioned below to complete the process.

● Most importantly, ensure that your printer and the router are both placed closely to eliminate any issues with the connectivity.

● Use the navigation arrows on the printer (Up and Down) to browse through the menu and choose Network Connection.

● Choose the WLAN option next using the same navigation buttons and then press OK.

● Select the WPS or Air Station One-Touch Secure System option from the menu and then choose OK on your Brother 2360dw printer

● Please tap on the Back or Cancel option if you wish to cancel the process when the Wizard Setup Wizard appears on the screen.

● When the printer’s control panel shows Press Key on RTR, please press and hold the AOSS or WPS button on the wireless router for about 2-3 seconds.

● If the connection succeeds, the status should display as Connected; please choose OK when it does

With the steps mentioned above on setting up the Brother HL-L2360DW laser printer, you can successfully execute the wireless setup. In case you remain unsuccessful in setting up your Brother printer, please reset the connection by selecting the menu button and then choosing OK. Select the Network Reset option and then press 1 to choose Yes. Select 1 again to confirm the reboot, and your Brother printer shall reboot.