Cisco 300-135 TSHOOT dumps

by Karen Paramo IT sales consultant If you use the CertTree Cisco 300-135 TSHOOT dumps, you can reduce the time and economic costs of the exam. It can help you to pass the exam successfully. Before you decide to buy our Cisco 300-135 TSHOOT dumps, you can download our free test questions, including the PDF version and the software version. If you need software versions please do not hesitate to obtain a copy from our customer service staff.

At CertTree, you can choose the Cisco 300-135 TSHOOT dumps most suited to your learning abilities. CertTree has a wide array to offer, so that every individual has something to choose from. By purchasing Cisco 300-135 TSHOOT dumps, you will have all that is necessary for completing the 300-135 exam with all Cisco 300-135 TSHOOT dumps that are always up to date. You will receive the highest quality and support with CertTree customer service (live chat) that will fulfill all of your certification needs. Purchase Cisco 300-135 TSHOOT dumps today, simply put, CertTree is your key to opening up new doors for a brighter future.
Share some CCNP 300-135 exam questions and answers below.
R1 and R2 OSPF neighbor.
Which two statements are true? (Choose two)
(Output from show ip ospf neighbors on 2 routers, one of them shows FULL/DR, the other FULL/-, you need to know how were they configured and will they exchange routes)
A. They are not neighbors
B. R1 (non-DR) will not update its routes to R2
C. Router R2 is configured with ospf point-to-point command (R2 is the router that shows as FULL/-)
D. They need to be configured as OSPF NBMA
E. R2 should be configured as stub
Answer: BC

The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C

Ticket 5 R1ACL

TROUBLE TICKET STATEMENT:
The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server).
show run by yourself to obtain the following information:
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Configuration on R1
! interface Serial0/0/0/1
description link to ISP
ip address 209.65.200.224 255.255.255.252
ip access-group edge_security in
ip nat outside
ip virtual-reassembly
ntp brasdcast client
net broadcast key 1
no cdp enable
!! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255
ip access-list nat_traffic permit 10.2.0.0 0.0.255.255
! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any
ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any
ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any
ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any
ip access-list edge_security permit ip host 209.65.200.241 any

On which device is the fault condition located?
A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
Answer: A


What is the solution to the fault condition?
A. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command.
B. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command.
C. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command.
D. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected command.
Answer: D

What is the solution to the fault condition?
A. Under the interface Tunnel34 configuration delete the tunnel mode ipv6 command.
B. Under the interface Serial0/0/0.34 configuration enter the ipv6 address 2026::34:1/122 command.
C. Under the interface Tunnel34 configuration enter the ip address unnumbered Serial0/0/0.34 command.
D. Under the interface Tunnel34 configuration delete the tunnel source Serial0/0/0.34 command and enter the tunnel source 2026::34:1/122 command.
Answer: A

The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C


What is the solution of the fault condition?
A. Under the ip access-list edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command
B. Under the interface Serial0/0/1 enter the ip access-group edge_security out command.
C. Under the ip access-list edge_security configuration delete the deny ip 10.0.0.0 0.255.255.255 any command
D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access group edge_security out command
Answer: A

Which command will limit debug output ppp authentication on serial 0/1 and serial 0/2?
A. debug condition interface range s0/1 -0/2
debug ppp authentication
B. debug condition interface s0/1 & 0/2
debug ppp authentication
C. debug int s0/1
debug int 0/2
debug ppp authentication
D. Debug condition interface s0/1
Debug condition interface s0/2
debug ppp authentication
Answer: D

What is the solution of the fault condition?
A. Under the BGP process,enter the bgp redistribute-internal command
B. Under the BGP process, bgp confederation identifier 65001 command
C. Delete the current BGP process and reenter all of the commands using 65002 as the AS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command.
Answer: D

What is the solution of the fault condition?
A. Under the BGP process,enter the bgp redistribute-internal command
B. Under the BGP process, bgp confederation identifier 65001 command
C. Delete the current BGP process and reenter all of the commands using 65002 as theAS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command.
Answer: D



CertTree provide a good after-sales service for all customers. If you choose to purchase CertTree Cisco 300-135 TSHOOT dumps, CertTree will provide you with online service for 24 hours a day and one year free update service, which timely inform you the latest exam information to let you have a fully preparation. We can let you spend a small amount of time and money and pass the IT certification exam at the same time. Selecting the products of CertTree to help you pass your first time Cisco certification 300-135 exam is very cost-effective.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Dec 8th 2017 00:24. Viewed 337 times.

Comments