Anchor Bolts: Types and Uses

by Avadhesh Sharma SEO Analyst

Structural components are connected by anchor bolts to the concrete. The anchor bolts in our industry are commonly used to fasten steel to concrete. An end is inserted in the asphalt, while the other end is attached to the structural foundation. Four major anchor bolts exist L-shape, twin-end rolls with the platform, heading, and swedge. The uses, measurements, and advantages of each form are their own. Let's go over every form of anchor bolt manufactured by Anchor Bolt Manufacturers UAE and how it is used every day in structural applications.

L-Shaped Anchor Bolts

In a number of applications including light post, frame, heavy tooling, and heavy machinery, L-shaped anchor bolts are used. At Birmingham Fastener, L-shaped bolts are distributed with a diameter of between 3 and 8 inches and a length of 2.5 inches as needed by the following rules: A307, F1554-36, F1554-55, F1554-105, A193 B7, 304 Stainless, 316 stainless, and any class required of the customer.

Double End Rods With Plate

These are double end rods with a washer on a single end. These are anchor types. The plate may be either welded to the anchor bolt or sold to a concrete-enclosed nozzle. Plate bolts are mainly found in building poles, road signs, and other uses. At Fastener in Birmingham, we supply straight with 3/8"-4" plate-bolts, and any length required in compliance with the following standards: A307, F15054 -36, F1554-55, F1554-105.

Headed Anchor Bolts

Unlike the rest of anchor bolts, leading anchor bolts on their unthreaded end have forged heads. Hex, strong hex or quadratic head is usually. The head is inserted in the mortar to secure a number of constructions, including structural columns. At Birmingham Fastener we offer the following standards: A307, F1554-36, F1554-55, F154-105, A193 B7, 304 Stainless, and 316 stainless, straight and with headed anchor bolts in 1/2"-2" diameter and any length needed by the customer.

Swedge Bolts

Swedge bolts are made from a steel round bar, which is fastened with one end and "swedged" with the other end. "Swedged" means that one end has many indentions to enable concrete to flow through it. Swedge bolts, used to connect girders and piers, are 100% household bolts. Most swedge pads are galvanised in hot dips and vary between 5/8" and 4" in diameters. They also come in other materials such as stainless steel.

Final Words

Structural components are anchored to concrete through anchor bolts. In our business, the anchor bolts are typically used to attach concrete to steel. The other end is attached to the structural base. An extreme is inserted in the asphalt. The four main bolts of the anchor are: L-shape, platform, heading, and swedge twin-end rolls. Each type has its own applications, dimensions, and advantages. Let us go over each type of anchor bolt and how it is used in structural applications every day.