The simple overview of the belt conveyor

The belt conveyor first require the river have water, mineral processing equipment must work to be floating on the water, so we use 3.5-4 mm steel plate made of a floating body, magnetic separation system mainly are the belt conveyor and washed featured. Its magnetic sheet strength is generally to achieve 3800-4500 Gauss, specifications for the 750 * 2200-2400, so that the supporting can achieve 90% of the net selection rate. Depending on the dredging depth, width and length of the floating body has a corresponding size requirements, the belt conveyor is generally between 1.5-2 meters in width, length 16-32 m. Further, in order to increase the stability of the Bracket head ship, the interval between the two floating body a certain distance, typically about 1.5 meters. This mineral processing equipment roughly works as follows: the magnetic iron in the sand is elected through a belt conveyor. Here's a representative of the equipment - dredging the election iron ship's structure, principles and operational procedures. About as follows: the dredging election iron ship floating body, chain bucket dredging systems, screening systems, magnetic separation systems, tailing exclusion system , belt conveyors.