Species Of Corner Trim On The Market

For corner trim, the range of width is from 36-50mm, and the length can be customized.

1, Outer angle: construction industry nouns, refers to the walls protruding to the corner, such as the building outside the prominent four corners and doors and windows openings and the angle of the wall. Corresponding to the corners: refers to the wall concave on the corner. Corner: for the corner of the product to protect the packaging, protection of goods, cartons, wooden boxes, etc. from external crushing damage, damage.

 

2, According to hardness, corner trim can be divided into soft corner trim and hard corner trim. According to material types there are glass corner, metal corner, PVC corner, paper corner, wood corner, acrylic corner, soft silicone corner, foam corner and cloth corner etc. According to usage, there are sub-packaging corners, decorative corner and so on. The length of different, a small anti-collision angle to the large and long package door, package wall Corner.

 

3, Installation without punched holes: with glass glue, free nail glue, double-sided adhesive paste, the advantage is not damage the wall, the shortcomings did not punch firmly.

 

4, Installation with punched holes:

(1) installation height in accordance with the personal aesthetic point of view. Recommended height Corner from the ground 20-30 cm from the ground can also be directly to the ground or with the base line flush (also according to material decision).

(2) first affixed to the wall on the wall, put the required height, and do a good job in the installation hole mark, in order to take the corner after the accurate punch.

(3) with a drill for 5mm two drill hole, the plastic expansion bolt into the hole.

(4) align the hole on the corner with the hole in the wall, tighten it with the screw, and then cover the trim button (seal with the sealant).