Side panel of the dog house

Building your own dog house is an inexpensive way to create a special and customized house for man’s best friend. In this article you do not need to worry about unraveling the plan of a dog house because it is integrated into the following simple, short and practical 14 step processes that just about anyone can follow to build his own dog house.

Before setting out to build a dog house it is essential that you have a general understanding of the most important material (in this case wood), that you will use to build the dog house.

This knowledge of how to build a dog house will also help you in making the right decision when choosing wood type to build a dog house that will last some years.

Step nine:

Cut the 8’ 2x4 piece into 2 halves creating a pair 2x2 boards.

Cut 4 12”1/2 inches from each board making a total of 8 12”1/2 inches pieces from both boards, and one 22” piece. The 9 frames will be used to re-enforce the dog house.

Step ten:

Vertically line up 2 of the 12”1/2 inches pieces (step 9 above) with the top and sides of the 16” end of one of the 2 side pieces of 16’’ inches by 25’’7/8 inches (step 5 above), leaving two and a half inch from the bottom edge. Now nail these two 12’’1/2 pieces to the side piece using the 8d nail.

Repeat the same process to produce the second side panel.

Now attach these 2 side panel to the sides of the bottom frame constructed in step 8 above.

Build a Dog House:How I Built Mine in 14 Easy Steps

http://www.aboutdogfacts.com/build-a-dog-house/

About dog facts