Since
the last several years, acrylic and silicone have been trending as the most
preferred caulks. However, when it comes to shower caulking, these caulks
failed to work their magic. Apart from failing to serve their functionality,
acrylic and silicone caulks have a tendency to turn black within 5 months in
the shower area, despite of using large brand names that assure mold and mildew
resistance. So, even then why do most
households still go for acrylic and silicone caulking? Just because it is cheap
and easy to work with! Further, we will edify you with the best caulking
substitute- Sentura and also a phenomenal grout
sealer thinner which will simplify the application of Sentura.
Reasons to Knock Out Caulking
- The main issue with caulk is that it cannot stand dry and wet
settings efficiently. Where caulk dries up and cracks in dry settings, it also
peels and wears off the surface in wet settings.
- When applied in showers and exposed to ongoing moisture, it
re-emulsifies, softens and washes out of the joints
- If that was not all, caulk cannot withstand chemical cleaners
and scrubbing. These will eventually cause the caulking to loosen its bond.
- Thereafter, it becomes easy for moisture to accumulate into
the corners, causing fungus and bacteria to thrive in such damp and dark
environment.
- The growth of mold and mildew cannot be spotted through naked
eye in the initial phase. By the time it becomes noticeable, the mold will have
spread throughout the tile and grout. Therefore, apart from damaging the
surface, caulk also delivers an unaesthetic look.
To
put an end to these grave caulking issues, pFOkUS brings to you a path-breaking
product which will eliminate the curse of caulking. Sentura- a 2 part pigmented
solvent based epoxy/resin is engineered with a 1200psi adhesion to put away the
use of caulks.
Sentura- the Best Substitute for
Caulking
The
power packed product- Sentura is a befitting knock out to caulking as it
waterproofs the surface brilliantly. It is shower approved and you can be sure
that it will never peel or wear off from the joints. Sentura does not allow
moisture to retain in the corners, thereby preventing mold and stains. It is available in a wide range of 40 varied
colors to suit your project needs. Caulk
renders the beauty of the surface useless, Sentura on the other hand, amps up
the beauty quotient with its sleek and durable lines in showers.
Alco- the Thinner and Clean-up for Sentura
- Solvents
like Sentura require an alcohol based thinner, as it cannot be thinned with
water. Therefore Alco- the best
paint-thinner solvent comes to
the rescue. It is important to comprehend those oil-based and solvent sealers;
both need distinct reducers for thinning.
- During
the application process of Sentura to the corners of the shower with the help of
pFOkUS paint brush, you will observe that Sentura gets thicker as it starts to
dry. Therefore, spraying Alco on to the brush will assist in keeping the sealer
loose and free-flowing.
- Alco-
the best
paint-thinner solvent can be
used in a ratio of 10:1 for thinning Sentura. It is the best grout sealer
thinner solvent for cleaning up paint and grout sealers, apart from
Sentura.
Aren’t
these products something that you have been waiting for so long? You will be
glad that your wait ends here. To buy the above mentioned products visit,
@www.pfokus.com.