How to Read obd2motor car ECU chip by Motorola ETL 705 Programmer

Many Vehicle uses an electronic control unit (ECU) as the brain of the vehicle. The car ECU dominates everything that the engine does, from Odometer Correction to fuel delivery. and so on. The on-board diagnostics module (OBD-II) monitors everything the ECU does. and notifies you when something goes wrong through a "Car Service" light. Although all you see is the notification light, the ECU EEprom stores a code accessible by an OBD-II code reader.

ETL 705 Programmer Motorola 68HC05Bxx, 68HC05Xxx microcontrollers internal EEPROM

ETL 705 Programmer is used to read the motorola chip mainly, also called Motorola 705 programming tool. Besides, new Motorola 705 programmer also can be used to do Airbag Reseting and Odometer Correction, Read and Write Car chip, it is Car ECU chip programmer,

OBD2Motor Share: How to Read car ECU chip by Motorola ETL 705 Programmer

Step 1:  Free download Motorola ETL 705 Programmer

Step 2:  Check the installtion manual of Motorola 705 Programmer.

Step 3: Plug the com port(RS232) into the PC, and connect the ETL 705 Programmer with your pc. the pc will found the new hardware, use the driver file of Motorola 68HC05Bxx 705 progammer, install the ETL 705 progammer hardware drive.

Step 4: open the Motorola 705 Programmer software, and choose Com port, and the software will found new 705 Programmer,

Step 5: Click -file-new-programmer, create the file of 705 ECU programmer

Step 6: Choose the programmer model in the menu. and check the connections of chip and programmer in the menu,

Step 7: Choose : "read" button, read the data from ecu chip,  "Verify" button, Verify the chip is valid?  "program" button, write and program the chip.

Step 8: click-file-save,  finish one times demonstration of Motorola 705 Programmer.

Read more: How to Read car ECU chip by Motorola ETL 705 Programmer | OBD2Motor.com
 

Contact:

Elena

Email: adktechelena@hotmail.com

Skype: obd2motor

www.obd2.motor