How to Flash a Car Computer by MPPS ECU Chip Tuning

Motorola ETL 908 Programmer is car Chip ECU Programmer, is in-Circuit EEPROM programming (MON08 Rev1 adaptor must be used). Ultra high-speed On-Board FLASH/EEPROM programming, ETL 908 Programmer with 2x2 color LEDs indicates mode of operation, power supply status

Cars have an on-board computer called an engine control unit (ECU) which controls activities such as timing, emissions and fuel supply. The ECU is programmed at the factory for ordinary driving conditions encountered by the average driver. Often a driver will want to re-programming the ECU to provide better performance or gas mileage.

Use a ETL 908 Programmer, and an internet connection to download the ECU settings. Engine accessories such as headers or cylinder heads will usually come with a disk loaded with new settings.

Plug the Com port into the Motorola 908 Programmer. Install the ETL 908 Programmer software. and scan the new settings.

Turn the ignition to the "ON" position. Find the PC com port. Plug ETL 908 ECU programming tool into the port with the cable included in the scanner kit.

Turn the ETL 908 software on and let it access the ECU.

Follow the Motorola 908 Programmer instructions to upload the new settings into the ECU.

Read more Motorola ETL 908 Programmer| OBD2Motor.com