BTMA-The Components Of Automatic Oil Press.

The automatic oil press can be said to be the most used equipment in the oil press industry. The fully automatic oil press allows consumers to witness the entire oil pressing process with their own eyes. Smelling the enticing scent and looking at the crystal clear oil quality, users can rest assured to buy fragrant and healthy vegetable oils. Fresh vegetable oil is an indispensable consumable for people’s three meals a day. A fully automatic oil press is used to open an oil press in the local area, which can be retailed and processed with supplied materials, providing a variety of business models.The components of the automatic oil press are mainly composed of the automatic control part, the heating and pressing part, the adjustment part, and the transmission part.

1. The automatic control system consists of: air switch, AC contactor, temperature controller, automatic circuit protection system, etc.

2.The heating and pressing part is composed of heater, screw press and pressing strip, machine body assembly, etc.

3.The transmission part is composed of main shaft, reduction box, belt pulley, motor wheel, etc.

4.The adjusting part is composed of adjusting screw, adjusting nut, sub handle, lock nut, etc.

Among them, the automatic oil press has other components. Some users choose a vacuum oil filter. The vacuum oil filter is directly installed on the automatic oil press. If the user chooses a centrifugal oil filter, there is no need for a vacuum oil filter. The centrifugal oil filter is a separate filter device. You can choose one of the two.

Report this Page