A simple guide for repairing hydraulic cylinders

There are various machineries that are necessary for industries to function smoothly. Hydraulic cylinders are such machineries that are used for various industrial applications. From jewelry making to manufacturing aircrafts every industry uses this machinery for production purposes. Today, these hydraulic cylinders are designed in such a way that it meets the customized demands of the industry. They are also commonly known as hydraulic motors. It is one of motor that function with the help of an energy source. Various engineering vehicles use this device to a great extent. These machineries operate by obtaining power from pressured hydraulic fluids. Usually the fluids are oil in many cases. 

Benefits

·         These hydraulic cylinders are cost-effective when compared to the other types of mechanical cylinders.

·         These cylinders with dual measures can design and shape procedures that are not possible with the help of any other motors.

·         It can be used across various industries like aviation, farming, oil and gas, mining, forestry, government and military, fire, etc. It suits every type of industry.

·         They are available in different sizes. The industries that require small motors can buy the small ones, while the industries that need big motors can buy the big ones. According to the industry’s preference you can buy these machineries.

·         New forms of valves and other components are being used in order improvise their performance.

Reasons for failure of Hydraulic cylinders

If the piston rod is bent, the entire system might not function properly. This is one of the common reasons that lead to the failure of his device. When the system is used consistently for a long time, there are chances of crack being developed. Due to any small wear and tear, the seal of this machinery might also develop cracks causing problems for the machinery. Sometimes even piston rings get damaged due to various reasons. There are a few guidelines that will help in repairing these hydraulic cylinders. If you follow these guidelines properly there are chances of this machinery lasting for a longer period of time.

Guidelines for repairing hydraulic cylinders

·         Firstly you need to remove the hydraulic cylinder from the machinery. Once you have removed the cylinder out, open it with the help of screws or bolts and remove the piston out of it. In order to reduce the pressure you need to loosen the valves and then detach it completely by sliding the piston shaft outwards.

·         Now you to observe the hydraulic cylinder closely and see if you can notice any damages or cracks. In case the pistons are bent see that you go to proper repairing shop where the device can be repaired by professionals. And if the bolts and shafts are alright, it means seals are damaged and that is leading to the leakage of the fluids.

·         You can fix new seals in place of the old ruptured ones. You can follow the basic instructions that are usually provided by the manufacturers at the time of purchase.

For more visit  http://goo.gl/P85O89