4 Easy Ways to Know When and How to Repair your Car Brakesby Forza Tyres Auto Garage
For a smooth and hassle-free ride, your vehicle’s brakes should be functioning correctly. Maintenance plays a vital role in an efficient braking system. Refilling your brake fluid, replacing worn disc brakes and a brake pad replacement in Peterborough are some of the handy remedies you must resort to.
But how do you know when to go ahead with them? To do that, you need to identify the issues first.
4 easy remedies to stay ahead of a brake repair or replacement:
Replacing brake fluid
A loose brake pedal that goes too low before slowing down requires you to change the brake fluid. The fluid helps your brake’s master cylinder to transmit hydraulic pressure equally to the brakes. As it can absorb water, the fluid can easily boil at high temperatures, typical to car brakes.
You should change it after every 20,000 miles or 2 years. If you delay the process of replacement, there are high chances that your brakes may let you down at the worst possible moment.
Tip – Avoid shaking the bottle of brake fluid before you add it to the brake master cylinder.
Replace damaged brake lines
A damaged line in your vehicle’s braking system will lead to a leak. Leakage usually happens due to loose bleeder valves located on the calipers. It may also happen in the brake’s piston housing beside the master cylinder.
Use a lug wrench to loosen and remove fittings. Remove all clips and fasteners from the body mount. Install the new brake lines and add copper washers if required. Lastly, add fluid to the system and close the cap of your vehicle’s cylinder. It is always advisable to take professional assistance for such diagnosis.
Restore your brake discs
You need to have at least intermediate knowledge and experience to detach and re-attach your brake discs. You will need to remove the calliper and carrier from each brake. The carrier is the structure that keeps your car’s brake pads and callipers in place.
Remove your vehicle’s disc brakes with the help of a screwdriver. Install the new disc brake and do not forget to replace the brake disc screws. Clean the brake fluid that might have come out from the reservoir. Replacement of brake discs is lengthy and, at times, difficult. Refer to professional assistance from Forza Tyres to repair or replace your vehicle’s brakes. They can also help you with a comprehensive Vehicle Inspection Peterborough as well.
Change brake pads
You need to remove the wheel and unbolt your brake system’s calliper. A dislocated calliper leads to a brake failure. Observe the installation of all parts before you remove the brake pads. Once you remove the caliper, your vehicle’s brake pads should slide out.
Insert the new brake pads after you inspect your car’s disc brakes. Ultimately, you need to compress the brake piston with the help of a c-clamp. Re-install the calliper and your car’s wheel back into place.
Before you begin your next journey, make sure you have adequate brake fluid and inspect your brake pads. Tighten all the bolts and nuts in your vehicle’s brake system. Visit an authorised garage for your car’s Brake Repair Peterborough. Test all your vehicle’s brakes back and forth before you start again.
Created on Jan 19th 2019 03:09. Viewed 363 times.