125t/h Sedimentary rocks VSI Sand Making Machine Singapore

Impact Sand Description:
   I produced the impact crusher is widely used in a variety of hard, medium, fine art special hard material ore, cement, refractory material, bauxite, carborundum, glass raw materials high. But also has been widely used in mechanism building sand, stone and various metallurgical slag crushing, and other types of crushers yield compared efficacy will be higher.
Impact Sand works:
   Material from the hopper into the Impact Sand, the sub-feeder the material is divided into two parts, the intermediate sub-feeder into the high-speed rotation of the impeller, the impeller being rapidly accelerated its acceleration up to several hundred times gravity acceleration, and then at a rate of 60-70 m / sec projectile from three uniform impeller flow channel out, with the first part of the material impact of the sub-feeder four weeks since the resumption of the fall break, and then with the impact of the vortex branch cavity lining material layer, the lining material rebound oblique impact on the top of the whirl chamber, but also to change its direction of motion, deflected downward movement, rotation Road materials emitted from the leaves form a continuous material curtain. Such a material in the whirl crushing cavity by twice or even several times the probability of impact, friction and grinding crushing effect. The crushed material is discharged from the lower discharge port. Throughout under the crushing process, the material on their own mutual impact crusher, not in direct contact with the metal element, which is the impact occurred and lining materials, friction and grinding, which reduces the pollution angle, mechanical wear extended time. Whirl ingenious internal cavity flow from circulation, eliminate the dust pollution.
   Impact Impact Sand is widely used in metal and non-metal ores, cement, refractories, abrasives, glass raw materials, construction aggregate, artificial sand and a variety of metallurgical slag crushing and coarse grinding operations, especially for the hard, special hard and abrasive materials such as silicon carbide, carborundum, sintered bauxite, magnesite, etc., more advantages than other types of crushers. And supporting the use of hydraulic protection jaw crusher can handle a variety of metallurgical slag. Construction sand, gravel roads used preferably as appropriate.
  It works in terms of impact Sand, simple point that is rock-stone principle. Let the stones fall in the natural course of the collision and after the impeller accelerated thrown out of stones, so as to achieve the purpose of crushing! And with natural stones falling stones thrown by accelerated collision time and the formation of a vortex, the return process has performed twice broken, so that during operation of the machine counterattack plate wear is very small!
   Impact crusher simple structure, low cost, smooth operation, energy efficient, and impeller whirl crushing cavity lining material from the substantial reduction in the cost of wear parts and maintenance workload, effectively solve the broken glass and other materials during the "iron pollution" problem and slag crushing process of "steel card" problem, clever internal airflow from the circulation to eliminate dust dispersion.
   Impact Sand work characteristics:
    1. The structure is simple and reasonable, low operating costs.
    2. crushing rate, energy saving.
    3. With crushing, coarse grinding function.
    4. The moisture content of materials subject to little effect, moisture content of up to about 8%.
    5. More work noise below 75 db (db level), less dust pollution.
    6. suitable for crushing medium hard, especially hard materials.
    7. Product into cubes, packing density, iron contamination is minimal.
    8. impeller from the lining wear small, easy maintenance.
Impact Sand Sand crusher and other advantages in comparison, there are many:
    1. The new structure, unique, simple and reasonable, smooth operation, low operating cost.
    2. "stone at stone", "stone blacksmith" means the state free conversion, sand, gravel, a multi-purpose machine. "Stone at stone" technology not only reduces parts wear and reduce production costs.
    3. energy consumption, high yield, large crushing ratio, energy saving and environmental protection.
    4. capable of shaping, the product was cube-shaped, high bulk density.
    5. The production process, the stone can form a protective bottom to wear and durable.
    6. A small amount of wear parts made of special hard wear-resistant material, small size, light weight, ease of replacement parts.
    7. Since air circulation system to reduce dust.
    8. The moisture content of materials subject to little effect, moisture content of up to about 8%.
    9. The spindle bearings lubricated with circulating lubrication oil station, spare pounds, to ensure a constant oil supply. Can realize automatic control and accident alert.
    10. The top cover lifting by hydraulic system, easy to operate.
I produced good quality rotary kiln, cheap, very suitable for medium and small manufacturers use, and that the company also produces a variety of crushing equipment, sand making equipment, such as: jaw crusher, at the international level have a pretty good feedback, I trust oriented. Welcome customers to buy. Website is:HENAN SHIBO

450t/h cobblestone Sand production line Single-stage hammer

600t/h marble Stone production line Cone Crusher

600t/h marble Crushing production line Jaw Crusher

500t/h limestone Mobile crushing plant Jaw Crusher