115t/h Feldspar European Type Jaw Crusher East Timor

A jaw crusher purpose and scope
This series of jaw crusher is mainly used in metallurgy, mining, chemical, cement, construction, refractory and ceramics and other industrial sectors for secondary and tertiary crushing of various ores and rocks with medium hard.
This series of jaw crusher is most suitable crushing compression strength not higher than 300MPa (MPa) of a variety of soft and hard ore, the largest block of the material to be broken is not greater than the technical parameters specified in the table.
Second, the working principle of jaw crusher
This series of jaw crusher work song moving extrusion type, its working principle is: motor-driven belt and pulley, through the eccentric shaft to move the jaw up and down movement between toggle plate and moving jaw angle when moving jaw becomes large rise , thus promoting the movable jaw plate close to the fixed jaw plate, simultaneously with the material being crushed or split pieces to achieve the purpose of crushing; when moving jaw down, the angle between toggle plate and moving jaw smaller, movable jaw plate trolley, spring under the action away from the fixed jaw plate, then the crushed material from the crushing chamber discharge port. With the continuous rotation of motor broken motor jaw for periodic motion crushing and waste material, to achieve mass production.
Jaw crusher performance characteristics:
1 crushing chamber depth and no dead zone, increase the feed capacity and yield, to effectively meet the needs of users;
2. The broken jaw crusher large proportion of uniform particle size to meet the needs of all kinds of stone;
3. Gasketed nesting population adjustment device, reliable and convenient, adjustment range, increase the flexibility of the device;
4. Easy lubrication system maintenance and easy to clean, easy to replace parts, greatly reducing the maintenance workload;
5. The jaw crusher simple structure, easy operation, operators can reduce labor costs, low operating costs;
6. The energy-saving equipment: stand-alone energy-saving 15% to 30%, more than double the energy-saving system;
7. The product is basically no noise, less dust, and environmental protection.
I produced good quality rotary kiln, cheap, very suitable for medium and small manufacturers use, and that the company also produces a variety of crushing equipment, sand making equipment, such as: jaw crusher, at the international level have a pretty good feedback, I trust oriented. Welcome customers to buy. Website is:HENAN SHIBO

130t/h shale VSI Sand Making Machine Laos

140t/h shale European Type Jaw Crusher East Timor

115t/h Basalt CS Series Cone Crusher Brunei

115t/h Basalt Ball Mill Cambodia