Shuliy Plastic Granulator Machine

by allen guo Energy processing

Whether the current of the plastic granulation main motor is stable (should be strictly controlled within the rated current), if the fluctuation is too large or rises sharply, it should be adjusted ac

Recommended Features

The operation record should be made during the operation of the equipment.
When cutting, pay attention to safety, can not directly participate in cutting with hands or iron rods, etc., according to the shape characteristics of the material:
Check if the temperature control, cooling, lubrication and other systems are normal.
Pay attention to observe or check whether the fasteners are loose and there is no vibration during operation.

Learn more about Shuliy Plastic Granulator Machine»

Review on Shuliy Plastic Granulator Machine

Manually cutting

Raw materials need to be cleaned (cleaned) before entering the processing. They must not contain water or be mixed with other kinds of plastics, waste paper, wood chips, sand mud, metal and other debris to prevent metal from entering the extruder. Regardless of the grade of the material, it should be kept clean and pure in principle.

Pay attention to the situation of raw materials, evenly cut off, keep the current steady, and the main motor current can't be higher than the rated current.

In the process of working, when the material is slow to produce, broken, etc., or when there is glue in the exhaust port, the template can be stopped or started, and moved to the exposed stencil to change the net for cleaning work.

During the startup of the plastic granulator, do not stand or watch the front of the die. Do not use the eyes to approach the exhaust port to view the condition. If necessary, use a round tube or other tubular material to divert the gas and watch it on the tube side. Gas or glue burns your eyes.