Wood debarker machine
by Parveen Kumar ownerWood debarking machine have a
feature of rotary cutting
of non-chuck rotary lathe, hydraulic pressure release into construction
and this process quickly and effectively remove bark and complete log round
work.
Major components of wood
debarker tree log debarking machine manufacturers are feeding port, skin
exit, wood exit, peeling roller, power transmission device etc.
This machine is applicable to peel log of MDF board and
papermaking industry.
This is mainly used to peel log, small wood and other wood,
qualification rate is more than 95 percent. Machine adopts advanced technology and
has advantages of low energy consumption, simple and compact structure, high
qualification rate and high productivity.
This kind of machinery is suitable for artificial slabs,
papermaking industry and wood chips production bases.
Wood debarker machine is mostly used in fiber plate mill, paper mill, veneer rotary cut
factory, wood factory, pulp factory, wood storage plant, and forest etc.
Its peeling effect is super for
popular woods like eucalyptus, popla, and its matched equipment suitable for
assembly line work.
PROCESS ROUTE OF WOOD DEBARKING
MACHINE
Process route of wood debarking machine are
as follows:
·
Log——Material
loading machine - Debarker feed chute——Barker -Discharging machine-Roller
conveyer-Belt conveyer——Chipper feed chute——Chipper.
·
Tree
bark fell from drum debarker out-feed channel and roller
conveyer——Belt conveyer——Energy plant.
WORKING
PROCESS
STEP 1- Load logs, tree branches
etc into roll groove.
STEP 2- Close feed baffle and then start –up
the machine in clockwise direction. As operation of machine gets started,
woods in roll groove are stripped by strip bar.
STEP 3- After fifteen minutes close
machine and then open discharge baffle, again start machine and operate
counterclockwise for two minutes, woods well peeled will be discharged automatically
from roll groove. Stripping net rate can reach >95%.
FEATURES OF WOOD DEBARKER MACHINE
·
It provides feature of traditional drum-type
wood peeling machine that help to stop while discharging and feeding.
·
Its stand alone operation
feature can peel 35 to 50 tons logs, helps in saving manpower.
·
Peeling effect can be adjusted
according to different wood species.
·
It helps in separating skin from wood
exit, realizing continuous work from feeding to peeling and
discharging wood.
·
Machines
have a feature of high peeling clarity, high
productivity, and small woodiness damage.
·
Machine have a four-side edge
tool this help in convenient to use, low cost.
·
Its cutter disc pressure
regulating is managed by hydraulic system that helps in
providing reliable performance.
·
This machine can supply with two rotary lathes
and can handle working of five or six people.
·
As large stationary machine, tiny energy, noise vibration, much lesser than skinned drum machine, without base install.
·
It provides convenient access to materials delivery system helps
in reducing labour intensity of Operator to increase production efficiency.
Veneer Plywood Machine is widely used in plywood and veneer making companies for producing veneer from wood. Optimum quality equipment used in manufacturing of Veneer Lathe Machine ensures higher durability, flexible strength and resistant to adverse condition. Machine has a compact structure, easy operation and its latest technology enhances speed & productivity. For manufacturing plywood, firstly this machine makes veneer. Plywood Veneer Making Machinery Manufacturers has discovered engineered technology of international standard level. This Machine have leading quality & accuracy parts which give you leading performance and high accuracy output of core veneer & face veneer products. Machine has a continuous ribbon of veneer of uniform thickness.
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.