What are the main features of 5-axis machining?

As we all know, the five-axis machining center, as a common mechanical equipment, has been applied in many fields, which has also contributed to the further increase of five-axis machining manufacturers. In recent years, the five-axis processing equipment produced by five-axis processing manufacturers with good quality and good service is in short supply, so this phenomenon is directly related to the characteristics of its five-axis machining. Here are the main features of the five-axis machining?

The 5-axis machining manufacturer believes that the five-axis machining machine is destined to put a lot of effort into the design stage in order to be better applied in the production. The structural design of the machine tool is complex, in order to achieve more precise rotation of the machining, and also to ensure The sensitivity of the five-axis cooperation, so the five-axis processing manufacturers believe that this equipment is also very high in configuration requirements in addition to the high design requirements of the machine tool.

According to the reasonably priced five-axis machining manufacturer, the five-axis machining is very different from the ordinary three-axis machining because it has two more rotational motions than the three-axis machining, and the space running track is not only complicated but also very abstract. Unimaginable and difficult to understand. Therefore, five-axis machining manufacturers emphasize the need for professionals who can understand spatial curves and coordinate transformations as well as spatial geometry calculations to ensure the quality and precision of the machining requirements.

Five-axis machining manufacturers are reported to require five axes to coordinate and coordinate at the same time, so it is required to have at least five state linkage control functions. Moreover, due to a series of actions of rotation, the workload of the interpolation operation is required, and the calculation speed of the control system is required to be very high. Therefore, the five-axis processing manufacturer considers that the processing is highly demanding on the control system, and generally needs to increase the RISC chip. The processor handles it.

To put it simply, five-axis machining manufacturers believe that the main feature of five-axis machining is that the structural design of the machine tool is complex and difficult and difficult. The programming is relatively complicated and the requirements for the control system are quite high. Therefore, it is precisely because of these characteristics that the five-axis machining center produced by the five-axis machining manufacturer can ensure more sensitive and precise work.

web:https://www.cncmachiningptj.com

Report this Page