Articles

Top Rules to Follow Regarding Frameless Glass Pool Fencing Installation

by Mark W. Glass Fencing Sydney
Getting a new swimming pool fencing installed in your property would stay as a very easy task until you abide by all the terms and conditions laid in the Australian law. Yes, there are several laws related to this that have to be followed, but yes, there are no rules as such regarding the type of fencing. This means that you can go for the most-pleasant looking, appealing frameless glass pool fencing Sydney as well. But here too, the rules would remain the same and here in this article, we have covered some of them.

Australian Standards-

According to the vendors, it is very important that the glass panels chosen for frameless glass fencing Sydney have the conformity marks of Australian Standards. With this mark, you will get an assurance that the glass panels are robust and built using the latest technology to give you the fullest assurance. They should be durable, robust and worth relying upon for total safety around the poolside area.

The Thickness of Glass Panels-

In terms of semi-frameless as well as frameless glass fencing Sydney, there are some very specific instructions related to the thickness of the glass panes. The thickness of these glass panes should be between 6mm and 12 mm, but 12 mm is not the capping. You can go for even thicker glass panels and in some cases, the vendors offer glass panes up to 18mm thick. However, they are offered only upon special request and for totally frameless glass pool fencing Sydney only.

Width and Height of Pool Fences-

Specifications related to the height and width of the frameless glass fencing Sydney are very clear and according to the laws, the minimum height of pool fencing should be 1200mm. As far as the width of the glass panels is concerned, laws say that it should be between 1600 and 1800mm. This width increases in terms of frameless fencing and goes up to between 1800 and 1900mm.

Spigot for Glass Fence-

High quality hardware is needed for the highest quality results in terms of installation and the most important piece of hardware is the spigots. According to the vendors, the most trust-worthy are the spigots made from stainless steel, as they are robust and resistant to rusting, corroding and so on. They are reliable enough to ensure that they will not compromise with the integrity as well as the strength of the frameless pool fencing Sydney.

Glass Panels-

The fact regarding glass panels is that apart from being used in frameless glass fencing Sydney, it can also be used around the stairs area, decking area and so on. But vendors say that irrespective of where they are used, their strength is something to be very careful about and this strength comes from glass thickness and proper installation. 

Only then, it is possible that they will deliver the kind of safety and security that you anticipate from them for your kids. The bottom-line here is that irrespective of whether you go with frameless or semi-frameless glass fencing Sydney, make sure that you never compromise with the quality of the glass panels. 


Sponsor Ads


About Mark W. Freshman   Glass Fencing Sydney

8 connections, 0 recommendations, 42 honor points.
Joined APSense since, December 4th, 2017, From Minto, Australia.

Created on Mar 8th 2021 04:20. Viewed 426 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.