Things To Know Regarding Replacing A Garage Door Spring

by David Richard SEO Expert

A garage door spring is one of those household items you probably never think about. Until it’s broken, that is, and you’re stuck in the garage with a door that won’t open and a car that can’t get you to work. When you’re faced with a snag, you have a couple of options: calling a pro or replace a garage door spring yourself. While replacing the spring yourself may save you a few bucks, having a pro do it will save you from the hazards that come with this task, particularly if you’re a less experienced DIYer.

If you would like to know more about what’s involved in garage door spring replacement before you decide to pick up the phone and call DDM Garage Doors in West Chicago, the following tips will help.

Before attempting to replace a garage door spring, verify the type of spring that you need to replace. These springs fall into two main categories: Extension Springs and Torsion springs.

Extension Springs are long, skinny springs that run parallel to the door’s horizontal tracks and store energy by extending or stretching when the door is moved. They can be open-looped, double-looped, or clipped-end.

Torsion Springs are broad and can be found on a metal shaft directly above the door opening. A garage door can have between one to four torsion springs, depending on the size, weight, and strength of the door. Torsion springs can be standard, early-set, steel rolling-door, or torque-master springs.

For residential replacements, the most common spring types are any of the extension springs, and either the standard or early-set torsion springs. Steel rolling-door and torque-master springs tend to be used only in commercial and industrial applications with much heavier garage doors.

Garage door spring replacements fall into two categories of hazard severity, depending on whether the springs are extension springs or torsion springs.

• Extension springs dangers to be aware of during this replacement include falling garage doors, activated openers during replacement, and minor cuts due to old or rusted metal.

• Torsion springs are heavy metal springs that are under considerable tension. Working with springs under tension can pose serious hazards, including flying metal if a winding cone or spring breaks, risk of minor to severe cuts, falling garage doors, and activated openers during replacement.

Once again my friends, garage door spring replacements, especially the torsion springs, are best left to the pros. Safety and caution take precedence when getting your garage door back into shape. Contact the pros at Garage Door Experts for all questions regarding the replacement of your garage door springs.