The Guide to Choosing and Installing a Whole House Water Filter

Several people are getting whole house water filtration systems installed in their homes because they want to have access to the cleanest water possible. 

 

In this guide, every important aspect of whole house water filtration systems will be discussed. This will give you a much deeper understanding of what it means to own one of these filtration systems. 

You will understand how water filtration can benefit you, what it takes to get one installed, and the important features that you can expect to enjoy. After reading through this guide, you will be ready to make the ultimate decision on whether purchasing one of these water filtration systems for your home is right for you and your family.

Typically, the whole home water filter is going to be connected to your main water line even before your hot water heater. This allows every drop of water that is entering your home to be completely filtered. 

The water will flow into the filter and will then have larger particles removed by the pre-filter. This will generally remove things from the water such as random debris, sand, or even sediment.

From here, there are multiple other filters that the water is going to pass through. Depending on the type of filtration system that you have purchased, there may be several filters that the water will need to encounter. 

The first true filter that the water passes through is known as an active carbon filter. This usually eliminates chemicals such as leftover chlorine and any straggling sediment while also eliminating bacterial elements that are present in the water.

After this is done, the water will pass through yet another filter. This filter is usually meant to eliminate zinc and copper from your water. It can also filter out other minerals so that you will have access to the purest water that is possible. If there is any trace of chlorine left in your water at this point, then it will be removed by this filter.

At this point, the water will pass through the water softener. This feature is not going to be present in every type of home water filtration system so be sure to check for it if you are in need. This step helps your water to soften up so that it can be used more readily. This will eliminate your hard water problem by removing magnesium and calcium from the water directly.

Some water filtration systems will come with an optional UV filter as well. This type of a filter is used to further eliminate bacterial elements from your water. If you are at all concerned about bacterial contamination in your water source, then it is highly recommended to use this filter. It will eliminate any leftover bacteria, microorganisms, or viruses that are present in the water.

Finally, you will have the water run through a post-filter. Most of the best water filters on the market will have a post-filter included. The post-filter is able to keep out any really tiny particles that have managed to sneak through the other filters. This allows you to enjoy exceptionally pure water and you will have the optimal water drinking experience at this point.

As you can tell, the process of how a water filtration system works can be somewhat complex. It needs to run through this many filters in order for you to have truly pure water. This is going to keep you as safe as possible from unwanted chemicals and bacterial elements. The water that you are using throughout your entire home will be as pure as it can be and this will give you peace of mind.

It is possible to install a whole home water filtration system yourself. You just need to make sure that you have the proper tools and some knowledge of how to use tools such as a pipe cutter. 

If you aren’t confident in your skills, then it would be a good idea to call in a professional to install your unit. You can often find professionals who are willing to install these water filtration systems at a very reasonable price.

If you’re installing it yourself, you need to shut off your main water valve and then completely drain out the water from your home system. You need to find an optimal place for your new filtration system to be installed. Remember to install it ahead of your hot water heater for the best results. You will then need to cut the pipe using your pipe cutter so that you can properly install the unit.

There should be instructions included with the filter itself. Depending on the filtration system, things can go a bit differently from here. Typically, you will need to install all of the nuts and then the brass fittings. Some of the fittings may be plastic fittings depending on your unit.

Make sure that everything is facing in the right direction before proceeding. There should be clearly labeled ports on the filtration system itself. One of the ports will be meant for incoming water and the other will be meant for the water that is pumping into your home. You want to get this right but once it is all set up, you should be completely ready to use your filtration system.

In order to purchase the optimal whole home water filtration system, it is crucial that you seek out one with the proper features. Take a look at the features that are going to be helpful to you. If you can find a whole home water filter that can meet these standards, then you will know that you are buying a superior product that is a worthy investment.

The first thing to note is that you will want to look for a filter that will eliminate the contaminants that you are worried about. If you want to figure out what contaminants your home is having problems with, then it is possible to purchase a water testing kit to get an accurate reading. This will allow you to know what you need to have filtered out and you can go forward with purchasing a whole home water filter system that will work the best for you.

You will also want to pay close attention to how well the water flows through each different filter. Your water filter is going to be capable of producing a certain amount of water every minute. This means that if you need it to be able to produce a particular amount quickly, then you will want to buy a unit that is going to suit your needs. 

If your household is large and you have the ability to use up a lot of water quickly, then you will want to buy a larger filter that will work better for you.

The longevity of your filter is also quite important. You want to be able to use your filter for a long time without having to change things out. Filters with greater longevity are often more expensive so you will have to weigh your options carefully. It may be possible to purchase a filter that has a longevity of one million gallons but it might cost more than you will want to spend.

This whole home filtration system is going to feature multiple filters as well. The filters are not all going to need to be replaced at the same time. You will want to pay close attention to the ratings on each of the filters inside of your unit. Replacing them is generally fairly simple so you shouldn’t need to worry about it too much.

Finally, it is imperative that you look closely at the micron rating of the filter that you are looking to purchase. The best filters are going to be capable of filtering out anything that is larger than 0.35 microns. 

You will find many filters on the market that are less expensive but are not capable of blocking out chemicals and other things that are quite that small. If you want the best possible experience, then you may have to spend a little bit more money to get a filter that is capable of providing you with the purest water.

Check out the best water filters for your home here: https://healthybuddys.com/best-whole-house-water-filter-systems/

Report this Page