Oil Testing Company
by Tisha J. Professional Content WriterA careful
analysis of used lubricant, insulating oil or coolant will reveal
just how well machinery is functioning. An oil testing company
specializes in the thorough examination of used fluids, providing
clients with an accurate model for predicting wear and tear. A
progressive series of tests will show what equipment parts are
subject to failure, allowing clients to establish a workable
maintenance program that saves money. Equipment that operates at peak
efficiency results in greater production.
Advanced Laboratory
Procedures
Used fluids are sent to a lab for careful analysis. The
testing company uses several pieces of modernized equipment that
looks for suspended particles, water, soot, grease and other
contaminants. Exposure to infrared light, viscosity measurements,
acidity tests, analytical ferrography readings, and particle sizing
through the use of a laser beam are just a few of the procedures
carried out when used lubricating fluid or insulating oil is examined
in detail.
An oil testing company matches the test results to
the actual machine parts from which the fluid was drawn. These
samples will clearly show if there is an immediate problem with the
equipment's function. Certain lubricating fluids reduce friction in
gearboxes, in and around pistons, and between ball bearings and
metallic surfaces. Any accelerated particle wear is noted by the lab
technician and pinpointed to the source. The actual metal fragments
discovered can be linked to a particular area of the
machinery.
Forming A Baseline Model
Results of an initial
test are shown on a graph, indicating when certain parts of a
compressor unit, baler, combustion engine, transformer or other type
of equipment are likely to degrade. This report indicates the overall
health of the machinery as well as how efficiently the fluid itself
is performing its job. Older pieces of machinery may be experiencing
metal fatigue, especially among the moving parts. Any leaks that
allow outside contamination to enter the equipment are identified and
included in the report.
Using this baseline model, clients
have the opportunity to schedule necessary maintenance on the
machinery. Subsequent tests performed at regular intervals will show
whether the machinery needs to be serviced on a different
schedule.
Ongoing Test Program
Clients who partner with an
oil analysis laboratory will save money on machine repair costs. The
equipment itself does not have to be shut down in order to draw a
fluid sample. This means less downtime and no loss of productivity
for the client. Implementing and managing a fluid test program can
involve in-house training conducted by the analysis laboratory,
giving employees the education needed to perform the sample
drawings.
Saving money on repairs to industrial equipment is
simply a matter of testing the fluids at regular intervals. Advanced
analysis of oils, lubricants, hydraulic fluids and coolants is far
less expensive than repairs on broken equipment. An oil testing
company is the ideal partner for a production operation, utility
company or manufacturer.
TricoCorp - Is one of the leading oil analysis service providers in a USA. We have a lab where we perform tests such as Oil Sample Analysis, coolants, fuels testing etc. oil sample analysis from reputable oil testing company will save you thousands of dollars and untold amounts of stress. For more information please visit:-http://www.tricocorp.com
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.