Issues That Generate the Problem of Low Water Pressure in a Shower

by Luke Tries Effects work on Waterproofing, Sealing, Grouting,

The shower area is the most frequently used and also the most fragile in a bathroom. Since it is used frequently daily, the wearing down speed is exceptionally high, and the breakdown could occur in several ways. In any breakdown, you will experience water loss, and to prevent this from happening, you must avail emergency shower repair services in Brisbane. A relatively uncommon problem we face regarding shower damage is the loss of water pressure. This is also a severe concern and perhaps the most annoying one when people are in a hurry every morning. This problem is also curable very quickly by availing timely services related to shower repairs. But before getting the repair work, it is essential to understand the root cause behind this problem and then the tips to increase water pressure.

What Reasons Cause Water Pressure Loss in a Shower?

Several reasons contribute to the emergence of this problem, and we discuss the top ones here, beginning with the issues arising in the shower mixing valve.

Shower Mixing Valve Problems

The root cause of this problem is the presence of a pressure-balance shower valve, and this will be very common while using other nearby fixtures. The classic example is the toilet flush, that when used, the water pressure gets very low in other parts. This mainly happens as the valve mixes hot and cold water at a certain pressure level. So when the toilet flush gets activated, the cold water is diverted to the tank for refilling. Until the tank gets refilled, the shower experiences low water pressure from the cold line. This is why the water from the shower suddenly becomes boiling. In this situation, the experts of shower repairs in Brisbane will install a thermostatic mixing valve. This problem will be completely eliminated, as the valve will offer separate controls for water temperature and pressure. You will not have to worry about the low water pressure for any reason. This is the standard solution, but if you continue to experience low water pressure in one line, it is essential to avail shower repair services from shower repair local professionals.

Malfunctioning In the Diverter Valve

A very common shower problem is the malfunctioning diverter valve, and this makes it mandatory to avail timely services related to shower repair in Brisbane. This diverter valve malfunction occurs when the bathtub and shower combo is installed. A knob or switch is there to divert water from the bathtub towards the shower head. With regular and frequent usage, the valve starts to malfunction, wear down and eventually give up. As a result, the water pressure towards the shower head is reduced drastically and due to this, the bathtub experiences water flowing at full pressure.

How To Prevent Malfunctioning In The Diverter Valve?

As mentioned above, it is essential to seek shower repair services from local professionals. They will diagnose the issue and complete the repair work, and the diverter valve replacement will also be done if needed.

Adjusting the Water Pressure Reduction Valve

A very common issue found in showers across the globe is that the valve used for water pressure reduction needs some adjustment. Remember, the water pressure problem can affect the water supply in the entire property, and this mainly happens due to the device called a water pressure reduction valve. It is connected to the main water line, and the pressure can be maintained and managed efficiently by making some adjustments.

How to Handle?

The problem with this valve is that it can malfunction very quickly due to its fragile nature. According to shower repairs local professionals, some adjustments will be needed, and if it does not work appropriately, replacement will also become mandatory.

Broken or Obstructed Pipe

Low water pressure is caused very frequently due to broken and obstructed pipes. Shower repair service professionals consider this the ugliest reason behind shower pressure drop. This crack or obstruction can result in leakage, and this is a severe concern for the property’s structural integrity. This leakage will be entirely undetected for some months. It is advised that any drop in the shower water pressure should be assumed as an obstruction in the pipe, and leakages should be searched for. If you detect any leakage, shutting off the water supply entirely and calling shower repairs local professionals for complete shower repair services in Brisbane is essential.

How to Prevent Cracks and Obstructions in Pipes?

Poor maintenance is the first reason behind these pipes getting obstructed, followed by clogs, tree root obstructions, natural deterioration, and other potential causes. Regular maintenance and inspection are the keys to maintaining the health of these supply pipes. If any damage, crack or broken pipe is detected, you must call the experts of shower repair services at the earliest.

Similarly, clogged pipes and shower heads are also very common reasons behind the dropped water pressure in the shower area. It is vital to keep the shower head clean and free from blockages. For this, you must invest some time in cleaning the nozzles with an old toothbrush. If you live in an area that has hard water, make sure that you remove the mineral deposit accumulation in the pipes and shower head area frequently. An alternative to this is installing a water softening system to convert hard water into soft water, but again, the pipes and showerhead area cleaning should not be ignored at all.

How To Add Pressure To A Shower?

If resolving these issues still doesn’t result in your desired water pressure level, try one of these solutions:

• Regularly Clean and Remove Scale Build-Up

• Replace Your Showerhead

• Have Your Water Heater Serviced

• Install a Shower Pump