Industrial videoscope - hit the pain points in industrial inspection!

by Funroad Showcase Jewelry Display Showcase "Special equipment" has a wide range of applications in all walks of life and plays an important role. "Special equipment" specifically refers to pressure-bearing, manned and hoisting equipment that involves life safety and greater danger. Among them, boilers, pressure vessels, Pressure-bearing pipelines are pressure-bearing special equipment. This type of special equipment has the characteristics of many dangerous factors, so it is particularly important to conduct safety inspections on special equipment. However, in the actual inspection process, inspectors will encounter various problems. , Not only is it difficult to eliminate potential safety hazards, but there are also problems such as high labor costs, long time consumption, and high material costs. Let’s take a look at how the Industrial videoscope brand Olympus solves these pain points.

Pain point 1: poor image quality

When using Industrial videoscopes to inspect pipes or confined spaces, the imaging quality of Industrial videoscopes is not clear, which leads to the inspection engineers taking more time to judge defects.

In practice, it can be known that for small defects that are difficult to identify with the naked eye, especially those directly less than 1mm, there are many variables in the real inspection environment. In the process of using Industrial videoscopes for exploration, the observation effect of traditional Industrial videoscopes may be restricted due to objective reasons such as the distance between the probe and the detected object and the observation direction. Users in the industry have proposed Industrial videoscopes. Observe the requirements for clearer images. In order to obtain higher resolution, our Industrial videoscope uses advanced imaging components, including hardware and software. Now the endoscope image resolution can reach 768x576 pixels. To help the inspector observe a clearer image and identify the problem faster.

Pain point 2: insufficient lighting

When using Industrial videoscopes to inspect the bottom of large-diameter pipes or pressure vessels, they often encounter the problem of insufficient lighting, which leads to blurry images and misjudgments or omissions of internal defects.

Using laser diode lighting technology of the same size as LED, the brightness of the lighting can be greatly enhanced. In this way, the appearance size of the device can be not increased, and bright illuminance can be achieved. Our Industrial videoscope uses a new type of laser diode illumination, its brightness is about 4 times that of ordinary LED lights.

Pain point 3: The probe is attached to the liquid

When using an Industrial videoscope to inspect a pipeline or a confined space, the image will be blurred due to the attachment of the probe to the liquid, and the probe line of the endoscope needs to be taken out for cleaning, which repeatedly increases the working time of the inspection.

We released a new type of oil-proof lens with patented technology. It has a brand-new industrial design that can effectively reduce the image blur of Industrial videoscopes caused by oil adhesion. After a long time of adhesion, it will cause cleaning difficulties and greatly increase the detection efficiency. , It also reduces the damage of the oil to the Industrial videoscope.

We start from the pain points in the actual use of users, and continue to improve product technology. There is no need to disassemble the inspected equipment during the inspection process, which is a very economical inspection and liberation program.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Aug 23rd 2021 01:06. Viewed 211 times.

Comments