How to Resolve Blue Screen Error Display on your HP Computer?

If your computer device stops responding and show a blue screen or restart repeatedly, then follow the solutions given below. In most of the situations, the computer does not respond to commands and it is necessary to press and hold the “Power” button for approximately few seconds or more in order to turn off the computer.

Perform a Hard Reset:

• Shut down your computer, if Windows is open.
  
• In case, Windows is not open, you have to press and hold the power button on your computer until the computer shuts off.
  
• Now, you need to power off and disconnect the power cord from the back of the computer.
  
• Here, you need to press the power button on the computer for few seconds, when the power off and the power cord is disconnected.
  
• Now, you need to reconnect the power cord and turn on the power.
  

Disable automatic restart to view error messages:

Most of the hardware driver or operating system issues occur because of the computer specific error message before stopping the operation.  Though, if the computer restarts automatically on an error condition, then the message must be the cleared off the screen before you identify to see it or write it down. Here, you can prevent the computer from restarting by disabling the automatic restart feature in Windows. This will enable you to view any specific error messages when a blue screen error occurs.

Search for specific error messages:

You need to search for the specific error message that appears on a blue screen because it might be possible that your error message is different-

• Error messages beginning with 0x.
  
• Driver_IRQL_ Not_less_or_Equal (This error normally contains the name of the driver that is experiencing issues).
  
• Whea_uncorrectable_Error.
  

Here, you should use the exact error in order to search the reliable solutions.

Run hardware diagnostic tests using HP PC Hardware Diagnostics:

Blue screen error can be the cause of hardware problems, such as the memory problem or hard drive issue. Here, HP Hardware Diagnostics UEFI allows you to test the major components on your computer device. Moreover, you can also use the HP computer Hardware Diagnostics UEFI even if the computer does not launch the Windows. In order to have more information, like hardware testing options for computers that do not feature a UEFI.

Install Windows updates:

If you do not have the latest updates for Windows, then a blue screen error occurs. Here, Microsoft might have an update for Windows in order to fix the blue screen error. But, you need to ensure that you have installed the latest Windows updates.

Moreover, you can also contact experts at HP Computer Support Phone Number +1-877-645-7494 to have more reliable support. The number is available 24/7 round the clock, where the team of experts is ready to cater their HP customers as quickly as possible.