How to do If Finished Products of Raymond Mill with Impurities?

Factors Which Cause High Content of Impurities:

1. Abnormal filtering apparatus

There could be two circumstances. The first one is apparatus damage, and the second one is improper mesh opening, which means that the mesh size is improperly large. The size of the mesh and attributes of the materials do not match.

2. Impurity of the material itself

The degree of purity of finished products will also decline if the material itself contains too many impurities. The problems caused by the material have nothing to do with the Raymond grinding mill, which makes the detailed analysis of materials and real-time detection necessary and important.

3. Motor failure

There exists a close relationship between the motor and running status of Raymond grinder machine. Motors with excellent properties can largely enhance the operating stability and reliability, which furtherly elevates the degree of purity of finished products. In all, the discharge can also be affected by the motor.

4. Insufficient cleaning

It chiefly refers to the maintenance of equipment. Regular machine maintenance is also an effective means to elevate the degree of purity. The cleanness of feeding port and discharging port deserves much attention and should never be neglected. The foreign matters in these two key areas will surely result to the high content of impurities.

How to Solve These Problems?

1. For the impurities caused by filtering apparatus, we suggest that investors replace the improper filtering device that with the same specification of materials under the guidance of professionals.

 2. Preliminary treatment or processing is necessary if materials themselves contain too many impurities, or you can pulverize or grind them repeatedly( this is not suggested, for it will increase energy consumption and investment costs).

 3. If the motor goes wrong, comprehensive detection and maintenance are indispensable. Regular lubrication is also necessary. These measures are all aimed at enhancing working performance and operating stability of Raymond grinder mill.

 4. For cleaning, there are two key points that investors should keep in mind: First thing is to clean up the foreign matters and wastes that exist between the clearance of Raymond grinding machine.Second is, after the machine is switched off, thorough cleaning is of necessity to avoid dust pollution from the outside.

You are welcomed to refer to the content above if the same problems happen to your grinding equipment. Hope we can help you solve your problem. If you have any other question please feel free to contact us by sending an email to customer@hxjq.com or you can also talk with our online service, we will help you in 24 hours.

This article is from 

http://www.china-sand-maker.com/article/how-to-do-if-finished-products-of-raymond-mill-with-impurities.html