Electric Scooter Parts - Replacing a CDI Module

One of the most not unusual of electric scooter components in want of alternative, the CDI module is as vital to the scooter ignition gadget because the spark plug. Thought to be an invention of the super Nikola Tesla, the Capacitor Discharge Ignition (CDI) is the standard gadget used on most of modern gas-powered motor scooters, as well as on many motorcycles, marine outboards and different small engines. A entire CDI module is made from a transformer, the charging circuit, the rectifier, a capacitor, and the cause circuit.

The transformer first increases the voltage to four hundred to 600 volts. Moving alongside the charging circuit, the electrical current charges the capacitor, with the rectifier stopping the capacitor from discharging before the ignition factor. Receiving the triggering signal, the cause circuit stops charging and permits the capacitor to discharge to the low inductance ignition coil. This will increase the authentic four hundred-six hundred Volt capacitor discharge to as a good deal as forty kV at the secondary winding, leaping the spark plug hole, and igniting the gas/air combination inside the cylinder. The charging circuit is then reconnected and resumes charging the capacitor all over again.   2021 best electric unicycles for adults

AC or DC?

Most modern scooters us an alternating current (AC) device; but the popular KYMCO scooter brand makes use of direct present day (DC). As a end result, electric powered scooter elements for KYMCO machines, which includes the CDI module, can occasionally be tough to discover.

Engine Size

It is continually great to healthy the engine length to the CDI specifications. A CDI module made for a 50cc engine may work on a 100cc, 125cc, or 150cc engine, and a few are designed to function over more than a few engine sizes. Others however, will simplest paintings for a specific engine displacement. Always test the specs to make sure of getting the precise scooter ignition components.

The 2-stroke and 4-stroke engines are completely one-of-a-kind, and as a result, their engines' ignition timing is definitely exclusive as properly. You can't use a CDI made for a 2-stroker on a four-stroke scooter. Conversely, you cannot use a four-stroke scooter's CDI on a 2-stroke scooter.

Connectors

On many modern CDIs, the connectors are imperative to the unit's case, forming a plug that snaps at once on to the scooter's wiring harness. On different models, the connectors may be placed on wires, allowing a few leeway on exactly where the module is installed. The skillful mechanic can also shorten or lengthen these wires as essential. The maximum not unusual CDI connector style makes use of  plugs side with the aid of facet; one 4-pin plug, and a 2-pin plug. These connectors may be rectangular, square, or easy spades.

Note: Photo illustrations of many CDI connectors can be seen at the internet site listed at the lowest of this article.

An unrestricted (or racing) CDI offers the modern regardless of how high the engine RPMs pass. As the CDI controls the spark plug, the plug will preserve to fire at excessive RPM. For reasons that have to be obvious, these CDI gadgets are made for racing use, and aren't very suitable for ordinary dual carriageway use. A limited CDI module however, will stop firing as soon as a pre-set engine RPM is attained. Without modern-day attaining the spark plug, the engine RPMs gradual to beneath the pre-set restrict and simplest then will the CDI resume providing cutting-edge to the plug.

Report this Page