Effective Solutions to Remove Epson Printer Error Code 0x97

Epson printer is the best printing device that has many facilities and features that make it popular among the users. This printing device is known for the best printing quality. But it’s not glitch-free. There are several errors which are encountered by the Epson printing device users. If you are facing Epson printer error code 0x97 then don’t worry. Generally, this error code occurs during the printing process and your printer will stop printing afterward.

In this case, you need to remove this error as soon as possible. To do this, you need to know the best troubleshooting ways. Here for your help, the experts are available 24*7. You can contact them anytime round the clock at Epson printer repair toll-free number +(1)-888-846-5560. In the article, we discuss the complete process to eliminate Epson printing machine error code 0x97. If you are unable to fix this error by applying the given solution then contact the experts without any delay.

Steps to remove Epson Printer error code 0x97

Epson Printing device error code 0x97 is not a very common error. Due to this error, your printer stops working. In this case, you need to apply the troubleshooting steps that are mentioned below:

Step 1. Try unplugging and plugging-in again

• Disconnect the entire connected cables.

• Disconnect USB drivers.

• Take out the entire printer cartridges.

• Still switched off, push down the power to discharge the entire remaining power in the printing machine. 

• Plugin the entire cables and the USB peripherals.

• Reinstall the printing device ink cartridges.

• Turn the power back on.

• Check to see if the error message is solved or not.

Step 2. Unplug and Plug-in Advanced method

• Turn off the Epson Printer and unplug it.

• Detach the entire cables and USB peripherals.

• Now, wait for a few minutes until the printer cools down.

• Push and hold the power key for a minute. Don’t release it.

• After a minute, connect the power cord and hold for an additional minute.

• Release the power key. See if the error message still appears. 

Step 3. Clean clogged Epson printer 

Sometimes, Epson users observed that the right fix for this error was merely cleaning the printer’s head nozzles. To do it follow the below-given steps in sequence.

• Turn off your printer and unplug it from the power supply in addition to your system. 

• Open the printer casing.

• Then, take a section of a paper towel, fold it up in order that it could fit below the printing device head.

• Wet it using any head cleaning fluid which has some ammonia.

• Position the soaked paper towel down the middle of the track where the printer head moves.

• Put the print head to the center so that the ammonia-soaked wipes are under it.

• Let it sit for 12 hours.