ceramic ferrules
by firoj Khan social media marketingWELCOME TO Ceramicferrule.net ceramic ferrules,ceramic ferrule for stud
welding,ceramic ferrules for stud welding,welding ferrule,weld ferrule,stud
welding ferrules
We have two kind forming way to make green body of ceramic
ferrule for stud welding.
Die Pressing(also called dry press in china)
This is by far the most widely used shaping technique for
advanced ceramics
ceramic ferrule is
contained within a hopper and fill the die cavity.The top punch of the die will
come down and compress the Granular powder
within the cavity to form the green body.Adjust mold and press machine
is important.
Injection Moulding
Low pressure injection moulding needs much lower cost
tools.By this technology,complex shapes can be made.
Using special mixing device, Ceramic powders and organics
are mixed together
The resultant mix is granulated and fed into an injection
moulding machine
The ceramic flow under pressure into a mould
The mould and the formed ceramic component is cooled quickly
to form a solid
Split The mould and the solid ceramic component is ejected
Our ceramic ferrule for
weld
stud ferrules is Precise design
and strict tolerance,Good concentricity and consistency,Good apprearance,Good
thermal conductivity function,Environmental Protection,high impact strength and
breakdown strength
VISIT FOR
MORE INFORMATION :- http://ceramicferrule.net
contact
Shanghai chengying welding parts Co.,LTD
Add:Lane 300,Xuanhua Rd,Changning Area,Shanghai,China
Phone:86-18116373072
Email : info@ceramicferrule.net
Sponsor Ads
Created on Jul 27th 2019 05:09. Viewed 255 times.