Case Combine Parts and Their Uses

by Estes Concaves Estes Performance Concaves The combine harvester is one of the most important pieces of farming equipment. The harvester, without a doubt, is a vital piece of equipment for farmers since it makes harvesting easier and more efficient. Investing in a Case combine harvester with the best Case combine parts can help farmers enhance their income. Because of the harvester's multiple advantages, the investment in the harvester and concave will pay off handsomely.

When the combine harvester is used for farming, it is important to be aware of the various parts the equipment has. Being aware of this would help in using the equipment effectively.

The uses of case combine parts

The various functions of case combine parts used in the combine harvester are listed below against each of the parts.

1. Header

The part of the combine that is in front of you is called the header. The header is the part that brings in the crop and cuts it with the cutter bar to begin the harvesting operation. This is where the harvesting procedure begins. The header with concave systems allows the combine to harvest a range of crops by adjusting the settings and using different types of bars. This ensures that the grain is chopped exactly without causing damage to the kernels.

2. Conveyor Belt

The conveyor belt transports the harvested crop from one combine section to the next. A conveyor transports the cut produce to the threshing drum first. The conveyor then transports the stalk and chaff to the back of the combine.

3. Threshing Drum

The threshing drum is one of the most important parts of a combine harvester. The process of separating the grain from the stalk and chaff is known as threshing. The drum is used to remove the stalks from the grain and prepare it for the next phase. The stalk is then taken to the back of the harvester, where it can be gathered or thrown out the back.

4. Blower

The blower is essential for ensuring that the crop is winnowed properly. The air from the blower causes the heavier grains to fall, while the lighter chaff escapes the combine.

5. Sieves

The collected grains are threshed and then sieved before being placed in the grain tank. The sieves use oscillating motions to ensure that the grains fall into the tank.

6. Auger

The auger (screws) and rotating section of a combine helps push the cut crop from the header to the other parts of the combine via the conveyor belt system.

7. Grain Tank

In the grain tank, the harvested grains are collected. When the grain tank is full, an unloader can move the harvested grains to another storage.

If you are into farming, then you need to ensure your combine harvester has the best case combine parts. Investing in quality parts would ensure you get the best returns. Using these parts will ensure you can increase farm productivity and also enhance the quality of crops. This will help you be more profitable.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Dec 30th 2021 01:06. Viewed 701 times.

Comments