BTMA-The pressing process of peanut oil press machine.

by Btma Oilpress Web Designer

The peanut oils press squeezing is explained. You can also choose the best equipment. The crude oil press has two types. Different pressing methods have different matching equipment. Benteng Machinery analyzes the oil press from two processes.chekku oil

1.The production standard of the oil press hot press process oil press are as follows:

Peanut shelling, frying peanuts, squeezing oil-filtering. A sheller can easily peel whole peanuts. This step can also be skipped if you buy the peanut kernels directly. The peeled peanuts can be fried. The peanut kernels should be fried until they have a light color. vegetable oil machine

When the temperature reaches 110-135 degrees, take them out of their pans and put them in the oil press to squeeze. After squeezing, oil can be filtered. It is now ready to be cooked in the pot after filtering. A peanut sheller is required, as well as a seed-frying machine, oils press, an oil filter, and a oil filter.gulab oil mills

2. Peanut kernels can also been cold pressed whole grains using an oil press The oil must be hydrated before cold pressing. The skin is often too dry for you to manually crush. Add 3-4% of water to the mixture, and then press cold. 30-40% of the cake.

cold pressed hemp oil machine

Cold pressing is the direct pressing of the oil without heating the seeds. To get the maximum oil yield, you need to squeeze the cake again. There are 130-150 models of cold presses.hari oil mills

These models both have a circulating hoist. The secondary pressing can easily be done directly without needing manual feeding.olive oil press