Blink Camera Blinking Red? Blink Camera Customer Service 1 805-791-2114

In this guide, we are going to tell you why your Blink Camera Blinking Red and how you can fix the issue in a short time. Some of the possible reasons why Blink Camera Not Working Red Light could be related to faulty internet connection or batteries, wrong motion detection settings, or the wrong setup.

In this guide, we are going to mention all those reasons that are responsible for the issue. In addition to this, you will get to know how to resolve the problem quickly.

So, have a little patience and start applying the steps until the issue will not get resolved.

Why Is My Blink Camera Blinking Red?

You must check the available internet connection if your Blink Camera Blinking Red and not working. The red blinking light represents that the security camera has stopped connecting to the internet.

Also, you will see the Blink camera flashing red while doing the Blink Security Camera Setup. You don’t have to be worried about the main reason is we are going to tell you some of the best ways to fix it.

Steps To Fix When Blink Camera Flashing Red Light

Check the internet connection and motion detection settings properly if your Blink Camera Connected but Not Working. Here are the steps to resolve the issue in a very short period of time.

1. Verify Network Connection

If your Blink security cameras were working perfectly but suddenly the red light started appearing. In this case, a faulty internet connection could be responsible for the issue. Hence, you would need to verify about the same until the issue will not be fixed.

2. Blink Security Camera Setup

If you are doing the Blink camera setup then it is normal that Blink Camera will start blinking red light. So, you don’t have to be worried because it will stop blinking after a while. The red light will be changed to blue and then green.

3. Reset The Blink Security Camera

After applying the above-mentioned steps, reset the security camera to factory defaults. Resetting the camera will resolve the Blink Camera Offline issue in a very short period of time. For the same, press the reset button with the help of a thin pin-like object until the device will not be restarted again.

Why Is My Blink Camera Flashing Red On Indoor, Outdoor, XT, and XT2?

If your Blink Camera Not Recording Clips then here are the steps that you can follow:

1. Check The Internet Connection

If your Blink security cameras were working perfectly but suddenly the red light started appearing. In this case, a faulty internet connection could be responsible for the issue. Hence, you would need to verify about the same until the issue will not be fixed.

2. Blink Camera Setup

Another time you will see the red light while doing the Blink Security Setup. This red light will then be changed to blue and then green. Hence, you don’t have to be worried.

3. Check The Motion Detection Settings

Check the motion detection settings from the Blink camera application. It may be possible that you have set them too low levels. This is why Blink Camera Not Recording anything.

4. Replace the Batteries

Check the batteries from the Blink security camera if your Blink Camera Blinking Red. It may be possible that your batteries get damaged completely and need to be replaced.

Conclusion

This article can be concluded on the point that a faulty network connection could be responsible for your Blink Camera Blinking Red. In this guide, we have mentioned all those reasons that are responsible for the red light on security cameras. Do follow the steps until the issue will not be fixed.