Smart Fix When Wyze Cam Not Connecting Properly With The Internet 1 805-791-2114

Even after trying for hours if your Wyze Cam Not Connecting to wifi properly, you should check the camera settings and the wifi. After doing that, make sure that the camera is placed within the network connectivity range. 

We know that for some of you it is very difficult to complete the troubleshooting process. But, it is not so difficult to fix it. 

So, with the proper concentration start following the guide. You just need to repeat all the troubleshooting steps until the camera will not start recording again. 

Wyze Cam Not Connecting To The Internet, How To Fix It?

One of the major reasons why the Wyze Cam Connection Failed issue occurs is because you have not connected it with a 2.4Ghz network connection. 

To check the same, here are the steps are given below. 

For Android Users

1. From the settings, open the “wifi and wireless network” and select the network connection that belongs to you. 

2. For the options that have been provided there, make sure to choose the network with 2.4Ghz. 

For ios Users

1. You need to verify whether your device is connected with the available internet connection or not. 

2. Open the settings and from there open the option of network connection. 

3. Check the network that you are connected with, it should be 2.4 GHz. 

Advanced Approaches To Fix Why Wyze Cam Not Connecting To Wifi 

We are now going to tell you a list of methods ranging from the basic to the most advanced ones. 

1. Double Check All The Cable Connections 

Start the troubleshooting methods by checking all the cables connected to the router and camera. In case you are using the wired network connection, remove the cables connected to the came and tighten them properly. 

Also, make sure that the power cable is connected to the wall outlet that has power access. Replace all the cables that were found damaged or in bad condition. 

2. Verify The Password Of The Wifi 

Soon after you have done checking the cable connection, make sure that you have connected to the right network connection. Also, don’t forget to check the wifi password. 

Several times the issue of Wyze Cam Not Connecting to the internet occurs because of the wrong password. 

3. Place The Wyze Camera Near The Router 

Another possible reason that may be responsible could be the distance between the Wyze camera and router. Hence, move your Wyze security camera near to the router within its connectivity range. 

4. Reset Wyze Security Camera 

Last but not the least, the method will definitely fix why your Wyze Cam Not Connecting to the wifi. So, reset your security camera with the help of the steps given below: 

• Remove the SD card that is inserted inside the camera. 

• Connect the power cable to the power outlet and press the setup button for 30 seconds. 

• Wait for some time until the camera will not reset completely. 

• The Led light on the camera should be changed from yellow to blink yellow. ‘

• Complete the Wyze Camera Setup again to complete the process. 

All the methods that we have discussed are enough to fix Wyze Cam Not Connecting to wifi error. Soon after you will complete the whole process, restart your Wyze security camera.