Basic rules for choosing the color of the grout:

Light grout allows you to create a visually holistic fabric and expands the space, allowing you to hide the imperfect pose of the tile itself

dark grout is best suited to isolate individual areas and parts of the composition

for floor tiles most often use a gray or brown grout

color grout is chosen based on the lightest color or, conversely, the darkest in the tile pattern

contrasting grout is not used in photopan and mosaic design

bright, standing on the bottom of the tile grout is used only on perfectly aligned surfaces, because it highlights the lack of style

for contrasting patterns (for example, black and white tiles), it is recommended to use a neutral tone

Transparent mosaic grout, Litokol

When choosing a grout, think about how it will be combined with your tile or mosaic. Also consider that the epoxy composition can be quite complex in application and will require the intervention of professionals, but over time, it will lose neither its properties nor appearance . In any case, only a thoughtful approach to the choice of materials and finishes can create an interior that will delight your eyes for many years.

Coulis color

The moment you could choose the color of the grout was only two options, white and gray, long gone. At your service almost any nuance, which is really worth using. Of course, white grout is still used quite often, especially in light interiors, but it is not worth using for floor tiles.

Coulis colore, Litokol

Choose the grout that is the best at the same time as the tile, and if you do not buy them at the same time, do not forget to take a sample of the tile, to make sure that the chosen grout will suit them.

The epoxy grout composition comprises

The epoxy grout composition comprises epoxy resin, additives, quartz sand and hardener. Before work, it is necessary to mix the epoxy and hardener, which gives a dense and elastic mass. Due to the fact that the ready-to-use mass of the epoxy grout is more viscous, it is difficult to work with it for a long time.

The result of the work will last several decades, without losing its brightness and its protective properties. In some cases, glazes and other components may be added to the grout, which enhances the decorative effect of tile laying.

Purchasing a grout for tile in the form of a powder is more practical 

when the volume of work is important. In this case, you can take in the bag the required amount, prepare the composition and use, and remove the remaining mixture until the best times, the main thing is to store the powder in a dry place.

With the advantages of cement joints, they have disadvantages. They can disintegrate under the influence of household chemicals and pollution. But they are easy and simple to use, they are cheap and have a wide variety of colors. Cement grout can be selected for almost any shade of tile. Before purchasing cement grout. I get more information about epoxy grout vs cement grout then I decided to choose cement grout for tiling.

Tile grout, with a few exceptions, is a grout of cement

which is usually packaged in the form of a powder and mixed with the liquid in the form of a thick paste, which is used to fill the seams between the tiles, the protection, support and framing of their edges. Since, according to the instructions, the grout must be pressed into the joints with a force, the grout also helps to reduce the penetration of water into the seams. However, there is no grouting (at least now on the market) that would be completely impervious and that would be able to stop the penetration of water or moisture into the base.