5 Tips To Prevent Carpet Mould After Water Damage

by Perth Carpet Master Carpet Repairer & Restorer

If you’ve experienced water damage, run to grab some expert tips before mould makes itself comfortable in your home, especially on your carpet.

A faulty pipe or strong rain can lead to a variety of problems in your home. Carpet damage is one of them, particularly the growth of mould under carpets. The trouble is something that doesn’t take much water to kick-start carpet mould. Due to the moisture and high temperatures present during spring or summer storms, mould can quickly grow and cause a lot of damage to a carpet. It is crucial to eliminate the moisture from your carpet if you want to prevent a mould attack. In case if you want you can also hire a professional to get wet carpet restoration service. Now let’s have a look at these effective tips -

Stop the Leak

Find the source of the leak that flooding your home and stop the unwanted water flow at first. Carpet mould can develop within 24 hours, so all unwanted water needs to be extracted from your carpet quickly. In this scenario, a dry vacuum can help to clean up as much water very quickly.

Generate Air Flow

Try to create as much airflow as possible in the affected area of your carpet to remove bad odour and wetness. Before focusing on impeccable cleaning and drying it's better to use high-powered fans to circulate airflow inside your room.

Use a de-humidifier

De-humidifiers can remove excess water and moisture, which makes the air feel cooler and limits mould and mildew growth. Using the right equipment can help to dry out the air and the ground and will speed up the drying time for your damaged floors and coverings. If you are not confident about doing a good job by yourself then simply go for a wet carpet restoration service.

Steam cleaning

During steam cleaning, steam vapour penetrates deep into the carpet and surrounds carpet fibres to prevent mould growth as well as helps to soften and loosen dirt and shift old stains. Then the vacuum component of the steam cleaner applies pressure to lift away the moisture along with the mould, germs and dirt, for fresher and cleaner carpets.

Sanitization

Finally, before you relay your carpet please make sure the floor and other surroundings are properly sanitized, because floodwaters may contain bacteria, so coming into contact with it could be dangerous. Using sanitizing solutions to clean your furniture, drywall, hard flooring, and other surfaces can help such to kill mould developing behind the walls and keep germs and bacteria from spreading to other areas in the home.

The prevention of carpet mould is a top priority after a water damage incident in the home. Before trying to tackle mould removal on your own, keep these things in your mind. Still, if it feels like brainstorming for you then it's better to hire professional wet carpet restoration.