5 Easy Steps to Wax Your Boat

by Alex Riley Wrter

When it comes to taking care of your boat, it is necessary to do regular cleaning. And, to make that happen, you need to have all the necessary boat cleaner wax and other required products. Waxing your boat is extremely important as it will keep the vehicle looking new even after years of regular use. Taking proper care of the boat will serve the vehicle with much-required protection.

After using the longest-lasting boat wax on your boat, you notice that it helps prevent the gel coating from getting oxidized. The fiberglass beneath the gel coat also gets damaged with time. Boat wax keeps this problem at bay together with preventing water penetration. Waxing your boat is a task you must perform carefully with concentration, as no part should be left untreated.

Below are five steps you can follow to wax your boat like a pro!!

Start with washing the boat

Before applying any kind of solution or cleaning product on the boat, it is imperative to clear all the dirt and dust particles layered on the base. To make the process easy and quick, remove the debris using warm water and soap solution. This will help wash off the contaminants stuck on the boat's surface.

Moreover, the soap solution will also help remove the previously applied boat cleaner wax and polish from the boat.

Check for mildew or molds while removing dust

Due to moisture, the boat's surface might get molds or mildew. While cleaning the dust with soap solution, check if any molds are present. And if you find some, just add some bleach to the soap solution and clean the area.

Removing the grease from the boat

Take a piece of old cloth that can be used for cleaning. Soak it in some solution like acetone or toluene and use that soaked cloth for wiping the surface to be waxed after you are done removing the dust from the boat. This way, you can easily remove all the remaining grease, wax, or oil particles from the surface.

Important Notice: always wear gloves and a protective mask while using solvents.

Applying the product on the boat surface

The next step is to remove all the oxidization using a rubbing compound before you start applying the polish. And, if you don’t notice any oxidization on the boat surface, you can directly start with polishing. It is highly recommended to use a buffer or electric polisher to get a perfect and smooth finish and make the process much easier.

Polishing and waxing the boat

The last and final step is to apply polish and wax to the boat's surface. The major purpose behind polishing the surface is to make the base smooth and ready to wax. After you are done with polishing, it's time to apply the Longest Lasting Boat Wax. This will protect the boat from air and water in constant contact with the surface.

Conclusion

In the present scenario, various online sellers offer buyers the most amazing boat cleaning and maintenance products. So, get started with your search now and place an order for all you need to keep your watercraft sparkling clean and new all the time.