40w CO2 Laser Engraver Review

A 40w co2 laser engraver is a great little machine to have for home or small business use. It can cut a variety of materials including wood, stainless steel (0.1mm), acrylic, fabric, and more. It's also quite powerful and does a lot of work in a short period of time.

How It Works

A 40w co2 laser engraver produces its beam inside a sealed glass tube which is filled with gas. The gas is excited by a high voltage, and when it interacts with the light from the tube the energy is released in the form of heat. This heat can quickly vaporize material that has a melting point of hundreds of degrees.

It's a good idea to read the manual before using this machine, as it has some tips and recommended speeds and feeds for common thicknesses of materials. I found that it cut birch plywood very easily and was fairly easy to engrave.

xTool D1 Pro is the world's most powerful diode laser module with 40W optical power that can cut materials like a hot knife on butter! It can engrave or cut wood, plywood, acrylic, fabric, stainless metal (0.1mm), rubber, and more in one pass.

How To Use It

To start, the xTool D1 Pro has a few different modes for different types of cutting and engraving. It is quite simple to set up and use, and has a very user-friendly interface. There are digital controls that allow you to consistently set the same power and speed, and a few temperature gauges for monitoring water temperatures.

Report this Page